Fetching the paper…
Reading the bibliography…
Conventional industrial robots often use two-fingered grippers or suction cups to manipulate objects or interact with the world.
J. K. Salisbury and J. J. Craig, “Articulated hands: Force control and kinematic issues,” The International journal of Robotics research , vol. 1, no. 1, pp. 4–17, 1982
1982
Earlier work this paper cites.
A. B. Vallbo and R. S. Johansson, “Properties of cutaneous mechanoreceptors in the human hand related to touch sensation,” Human Neurobiology , vol. 3, no. 1, pp. 3–14, 1984
1984
Earlier work this paper cites.
E. P. Gardner and C. I. Palmer, “Simulation of motion on the skin. III. Mechanisms used by rapidly adapting cutaneous mechanoreceptors in the primate hand for spatiotemporal resolution and two-point discrimination,” Journal of Neurophysiology , vol. 63, no. 4, pp. 841–859, Apr. 1990, publisher: American Physiological Society. [Online]. Available: https://journals.physiology.org/doi/abs/10.1152/jn.1990.63.4.841
1990
Earlier work this paper cites.
H. Liu, J. Butterfass, S. Knoch, P. Meusel, and G. Hirzinger, “A new control strategy for dlr’s multisensory articulated hand,” IEEE Control Systems Magazine , vol. 19, no. 2, pp. 47–54, 1999
1999
Earlier work this paper cites.
A. Cockburn and S. Brewster, “Multimodal feedback for the acquisition of small targets,” Ergonomics , vol. 48, no. 9, pp. 1129–1150, Jul. 2005, publisher: Taylor & Francis _eprint: https://doi.org/10.1080/00140130500197260. [Online]. Available: https://doi.org/10.1080/00140130500197260
2005
Earlier work this paper cites.
L. Van der Maaten and G. Hinton, “Visualizing data using t-sne.” Journal of machine learning research , vol. 9, no. 11, 2008
2008
Earlier work this paper cites.
J. S. Dai, D. Wang, and L. Cui, “Orientation and workspace analysis of the multifingered metamorphic hand—metahand,” IEEE Transactions on Robotics , vol. 25, no. 4, pp. 942–947, 2009
2009
Earlier work this paper cites.
B. S. Homberg, R. K. Katzschmann, M. R. Dogar, and D. Rus, “Haptic identification of objects using a modular soft robotic gripper,” in 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) . IEEE, 2015, pp. 1698–1705
2015
Earlier work this paper cites.
M. Tavakoli, A. Sayuk, J. Lourenço, and P. Neto, “Anthropomorphic finger for grasping applications: 3D printed endoskeleton in a soft skin,” The International Journal of Advanced Manufacturing Technology , vol. 91, no. 5-8, pp. 2607–2620, Jul. 2017. [Online]. Available: http://link.springer.com/10.1007/s00170-016-9971-8
2017
Earlier work this paper cites.
Z. Samadikhoshkho, K. Zareinia, and F. Janabi-Sharifi, “A Brief Review on Robotic Grippers Classifications,” in 2019 IEEE Canadian Conference of Electrical and Computer Engineering (CCECE) , May 2019, pp. 1–4, iSSN: 2576-7046
2019
Cited alongside, same era.
A. Billard and D. Kragic, “Trends and challenges in robot manipulation,” Science , vol. 364, no. 6446, p. eaat8414, Jun. 2019, publisher: American Association for the Advancement of Science. [Online]. Available: https://www.science.org/doi/full/10.1126/science.aat8414
2019
Cited alongside, same era.
S. Walker, O. Yirmibeşoğlu, U. Daalkhaijav, and Y. Mengüç, “Additive manufacturing of soft robots,” in Robotic Systems and Autonomous Platforms . Elsevier, 2019, pp. 335–359. [Online]. Available: https://linkinghub.elsevier.com/retrieve/pii/B9780081022603000147
2019
Cited alongside, same era.
B. Chen, Z. Shao, Z. Xie, J. Liu, F. Pan, L. He, L. Zhang, Y. Zhang, X. Ling, F. Peng, W. Yun, and L. Wen, “Soft Origami Gripper with Variable Effective Length,” Advanced Intelligent Systems , vol. 3, no. 10, p. 2000251, 2021. [Online]. Available: https://onlinelibrary.wiley.com/doi/abs/10.1002/aisy.202000251
2021
Later among the works it cites.
A. S. Dalaq and M. F. Daqaq, “Experimentally-validated computational modeling and characterization of the quasi-static behavior of functional 3D-printed origami-inspired springs,” Materials & Design , vol. 216, p. 110541, Apr. 2022. [Online]. Available: https://linkinghub.elsevier.com/retrieve/pii/S0264127522001629
2022
Later among the works it cites.
Z. Cui, W. Wang, H. Xia, C. Wang, J. Tu, S. Ji, J. M. R. Tan, Z. Liu, F. Zhang, W. Li, Z. Lv, Z. Li, W. Guo, N. Y. Koh, K. B. Ng, X. Feng, Y. Zheng, and X. Chen, “Freestanding and Scalable Force-Softness Bimodal Sensor Arrays for Haptic Body-Feature Identification,” Advanced Materials , vol. 34, no. 47, p. 2207016, 2022, _eprint: https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.202207016. [Online]. Available: https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202207016
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
2019
Cited alongside, same era.
E. Roels, S. Terryn, J. Brancart, R. Verhelle, G. Van Assche, and B. Vanderborght, “Additive Manufacturing for Self-Healing Soft Robots,” Soft Robotics , vol. 7, no. 6, pp. 711–723, Dec. 2020. [Online]. Available: https://www.liebertpub.com/doi/10.1089/soro.2019.0081
2019
Cited alongside, same era.
A. Mohammadi, J. Lavranos, H. Zhou, R. Mutlu, G. Alici, Y. Tan, P. Choong, and D. Oetomo, “A practical 3D-printed soft robotic prosthetic hand with multi-articulating capabilities,” PLOS ONE , vol. 15, no. 5, p. e0232766, May 2020. [Online]. Available: https://dx.plos.org/10.1371/journal.pone.0232766
2020
Cited alongside, same era.
R. Tao, L. Ji, Y. Li, Z. Wan, W. Hu, W. Wu, B. Liao, L. Ma, and D. Fang, “4D printed origami metamaterials with tunable compression twist behavior and stress-strain curves,” Composites Part B: Engineering , vol. 201, p. 108344, Nov. 2020. [Online]. Available: https://www.sciencedirect.com/science/article/pii/S135983682033393X
2020
Cited alongside, same era.
Z. Zhang, W. Fan, G. Chen, J. Luo, Q. Lu, and H. Wang, “A 3D Printable Origami Vacuum Pneumatic Artificial Muscle with Fast and Powerful Motion,” in 2021 IEEE 4th International Conference on Soft Robotics (RoboSoft) , Apr. 2021, pp. 551–554
2021
Cited alongside, same era.
C. Liu, P. Maiolino, and Z. You, “A 3D-Printable Robotic Gripper Based on Thick Panel Origami,” Frontiers in Robotics and AI , vol. 8, 2021. [Online]. Available: https://www.frontiersin.org/articles/10.3389/frobt.2021.730227
2021
Cited alongside, same era.
2022
Later among the works it cites.
A. Handa, A. Allshire, V. Makoviychuk, A. Petrenko, R. Singh, J. Liu, D. Makoviichuk, K. Van Wyk, A. Zhurkevich, B. Sundaralingam et al. , “Dextreme: Transfer of agile in-hand manipulation from simulation to reality,” in 2023 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2023, pp. 5977–5984
2023
Later among the works it cites.
2023
Later among the works it cites.
Y. Toshimitsu, B. Forrai, B. G. Cangan, U. Steger, M. Knecht, S. Weirich, and R. K. Katzschmann, “Getting the Ball Rolling: Learning a Dexterous Policy for a Biomimetic Tendon-Driven Hand with Rolling Contact Joints,” Aug. 2023, publication Title: arXiv e-prints ADS Bibcode: 2023arXiv230802453T. [Online]. Available: https://ui.adsabs.harvard.edu/abs/2023arXiv230802453T
2023
Later among the works it cites.
S. Kadalagere Sampath, N. Wang, H. Wu, and C. Yang, “Review on human-like robot manipulation using dexterous hands,” Cognitive Computation and Systems , vol. 5, no. 1, pp. 14–29, 2023, _eprint: https://onlinelibrary.wiley.com/doi/pdf/10.1049/ccs2.12073. [Online]. Available: https://onlinelibrary.wiley.com/doi/abs/10.1049/ccs2.12073
2023
Later among the works it cites.
A. Bhat, J. W. Ambrose, and R. C.-H. Yeow, “Composite Soft Pneumatic Actuators Using 3D Printed Skins,” IEEE Robotics and Automation Letters , vol. 8, no. 4, pp. 2086–2093, Apr. 2023. [Online]. Available: https://ieeexplore.ieee.org/document/10049113/
2023
Later among the works it cites.
J. Hernandez, M. S. H. Sunny, J. Sanjuan, I. Rulik, M. I. I. Zarif, S. I. Ahamed, H. U. Ahmed, and M. H. Rahman, “Current Designs of Robotic Arm Grippers: A Comprehensive Systematic Review,” Robotics , vol. 12, no. 1, p. 5, Feb. 2023, number: 1 Publisher: Multidisciplinary Digital Publishing Institute. [Online]. Available: https://www.mdpi.com/2218-6581/12/1/5
2023
Later among the works it cites.