Fetching the paper…
Reading the bibliography…
This paper presents the open-source robot inverse kinematics (IK) solver IK-Geo, the fastest general IK solver based on published literature.
D. L. Pieper, “The kinematics of manipulators under computer control,” Ph.D. dissertation, Stanford University, 1969
1969
Earlier work this paper cites.
W. Kahan, “Lectures on computational aspects of geometry,” Unpublished, Jul. 1983
1983
Earlier work this paper cites.
B. E. Paden, “Kinematics and control of robot manipulators,” Ph.D. dissertation, EECS Department, University of California, Berkeley, Jan. 1986. [Online]. Available: http://www2.eecs.berkeley.edu/Pubs/TechRpts/1986/631.html
1986
Earlier work this paper cites.
M. Raghavan and B. Roth, “Kinematic analysis of the 6R manipulator of general geometry,” in International symposium on robotics research . Citeseer, 1990, pp. 314–320
1990
Earlier work this paper cites.
H. Lee, C. Woernle, and M. Hiller, “A complete solution for the inverse kinematic problem of the general 6R robot manipulator,” Journal of Mechanical Design , vol. 113, no. 4, pp. 481–486, Dec. 1991
1991
Earlier work this paper cites.
——, “Inverse kinematics of the general 6R manipulator and related linkages,” Journal of Mechanical Design , vol. 115, no. 3, pp. 502–508, Sep. 1993
1993
Earlier work this paper cites.
D. Kohli and M. Osvatic, “Inverse kinematics of general 6R and 5R, P serial manipulators,” Journal of Mechanical Design , vol. 114, no. 4, pp. 922–931, Dec. 1993
1993
Earlier work this paper cites.
D. Manocha and J. F. Canny, “Efficient inverse kinematics for general 6R manipulators,” IEEE transactions on robotics and automation , vol. 10, no. 5, pp. 648–657, 1994
1994
Earlier work this paper cites.
C. Mavroidis and B. Roth, “Structural parameters which reduce the number of manipulator configurations,” Journal of Mechanical Design , vol. 116, no. 1, pp. 3–10, Mar. 1994
1994
Earlier work this paper cites.
R. Murray, Z. Li, and S. Sastry, A Mathematical Introduction to Robotic Manipulation . Boca Raton, FL: CRC Press, 1994
1994
Earlier work this paper cites.
I.-M. Chen and Y. Gao, “Closed-form inverse kinematics solver for reconfigurable robots,” in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No. 01CH37164) , vol. 3. IEEE, 2001, pp. 2395–2400
2001
Earlier work this paper cites.
M. D. Shuster and F. L. Markley, “Generalization of the Euler angles,” The Journal of the Astronautical Sciences , vol. 51, no. 2, pp. 123–132, 2003
2003
Earlier work this paper cites.
P. Zsombor-Murray, M. Hayes, and M. Husty, “Extreme distance to a spatial circle,” Transactions of the Canadian Society for Mechanical Engineering , vol. 28, no. 2A, pp. 221–235, 2004
2004
Earlier work this paper cites.
B. Odehnal, “Common normals of two tori,” Journal for Geometry and Graphics , vol. 9, no. 1, pp. 51–65, 2005
2005
Earlier work this paper cites.
M. Kong, Z. Du, L. Sun, and Y. Zhang, “Solution and application of two inverse kinematics subproblems,” in 2006 International Conference on Mechatronics and Automation . IEEE, 2006, pp. 1164–1168
2006
Earlier work this paper cites.
M. L. Husty, M. Pfurner, and H.-P. Schröcker, “A new and efficient algorithm for the inverse kinematics of a general serial 6R manipulator,” Mechanism and machine theory , vol. 42, no. 1, pp. 66–81, 2007
2007
Earlier work this paper cites.
T. Yue-sheng and X. Ai-Ping, “Extension of the second Paden-Kahan sub-problem and its’ application in the inverse kinematics of a manipulator,” in 2008 IEEE conference on robotics, automation and mechatronics . IEEE, 2008, pp. 379–381
2008
Earlier work this paper cites.
J. Zhao, W. Wang, Y. Gao, and H. Cai, “Generation of closed-form inverse kinematics for reconfigurable robots,” Frontiers of Mechanical Engineering in China , vol. 3, no. 1, pp. 91–96, 2008
2008
Earlier work this paper cites.
S. Abbasbandy and S.-j. Liao, “A new modification of false position method based on homotopy analysis method,” Applied Mathematics and Mechanics , vol. 29, pp. 223–228, 2008
2008
Earlier work this paper cites.
P. Zsombor-Murray and A. Gfrerrer, “3R wrist positioning – a classical problem and its geometric background,” in Proc. of the 5th Int. Workshop on Computational Kinematics, Springer, Berlin , 2009, pp. 175–182
2009
Earlier work this paper cites.
M. Pfurner, “Explicit algebraic solution of geometrically simple serial manipulators,” in Computational Kinematics: Proceedings of the 5th International Workshop on Computational Kinematics . Springer, 2009, pp. 167–174
2009
Earlier work this paper cites.
R. Diankov, “Automated construction of robotic manipulation programs,” Ph.D. dissertation, Carnegie Mellon University, Robotics Institute, Aug. 2010. [Online]. Available: http://www.programmingvision.com/rosen_diankov_thesis.pdf
2010
Earlier work this paper cites.
Y. S. Tan, P. L. Cheng, and A. P. Xiao, “Solution for a new sub-problem in screw theory and its’ application in the inverse kinematics of a manipulator,” in Applied Mechanics and Materials , vol. 34. Trans Tech Publ, 2010, pp. 271–275
2010
Earlier work this paper cites.
E. Sariyildiz and H. Temeltas, “A comparison study of three screw theory based kinematic solution methods for the industrial robot manipulators,” in 2011 IEEE International Conference on Mechatronics and Automation . IEEE, 2011, pp. 52–57
2011
Cited alongside, same era.
——, “Inverse kinematics solution for a 6R special configuration manipulators based on screw theory,” in Advanced Materials Research , vol. 216. Trans Tech Publ, 2011, pp. 250–253
2011
Cited alongside, same era.
S. L. Shmakov, “A universal method of solving quartic equations,” International Journal of Pure and Applied Mathematics , vol. 71, no. 2, pp. 251–259, 2011
2011
Cited alongside, same era.
A. Norrdine, “An algebraic solution to the multilateration problem,” in Proceedings of the 15th International Conference on Indoor Positioning and Indoor Navigation, Sydney, Australia , vol. 1315, 2012
2012
Cited alongside, same era.
J. Leoro, T. Hsiao, and C. Betancourt, “A new geometric subproblem to extend solvability of inverse kinematics based on screw theory for 6R robot manipulators,” International Journal of Control, Automation and Systems , vol. 19, no. 1, pp. 562–573, 2021
2021
Later among the works it cites.
J. M. Pardos-Gotor, Screw Theory in Robotics: An Illustrated and Practicable Introduction to Modern Mechanics . CRC Press, 2021
2021
Later among the works it cites.
Maplesoft, a division of Waterloo Maple Inc., “Maple 2021,” Waterloo, Ontario
2021
Later among the works it cites.
Franka Emika, “Franka production 3,” https://www.franka.de/production , 2022, (accessed Dec. 21, 2022)
2022
Closest in time.
KUKA, “LBR iiwa,” https://www.kuka.com/en-us/products/robotics-systems/industrial-robots/lbr-iiwa , 2022, (accessed Oct. 31, 2022)
2022
Closest in time.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
W. I. Clement, H. H. An, and B. Reed, “Analytical shoulder-elbow-wrist inverse kinematics for the 7-dof Motoman SIA50D robot arm,” NASA, Tech. Rep., 2013
2013
Cited alongside, same era.
J. Angeles, Fundamentals of robotic mechanical systems: theory, methods, and algorithms . New York: Springer, 2014
2014
Cited alongside, same era.
T. Rudny, “Solving inverse kinematics by fully automated planar curves intersecting,” Mechanism and Machine Theory , vol. 74, pp. 310–318, 2014
2014
Cited alongside, same era.
P. Beeson and B. Ames, “TRAC-IK: An open-source library for improved solving of generic inverse kinematics,” in 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids) . IEEE, 2015, pp. 928–935
2015
Cited alongside, same era.
C. Trinh, D. Zlatanov, M. Zoppi, and R. Molfino, “A geometrical approach to the inverse kinematics of 6r serial robots with offset wrists,” in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference , vol. 57144. American Society of Mechanical Engineers, 2015, p. V05CT08A016
2015
Cited alongside, same era.
Q. Chen, S. Zhu, and X. Zhang, “Improved inverse kinematics algorithm using screw theory for a six-DOF robot manipulator,” International Journal of Advanced Robotic Systems , vol. 12, no. 10, p. 140, 2015
2015
Cited alongside, same era.
L. Josuet, B. Carlos, L. Hsien, H. Te-Sheng, W. Chun-Sheng et al. , “An improved inverse kinematics solution of 6R-DOF robot manipulators with euclidean wrist using dual quaternions,” in 2016 International Automatic Control Conference (CACS) . IEEE, 2016, pp. 77–82
2016
Cited alongside, same era.
S. Lu, D. Zlatanov, and X. Ding, “Approximation of cylindrical surfaces with deployable bennett networks,” Journal of Mechanisms and Robotics , vol. 9, no. 2, p. 021001, 2017
2017
Cited alongside, same era.
ABB, “IRB 6640,” https://new.abb.com/products/3HAC020536-012/irb-6640 , 2022, (accessed Oct. 31, 2022)
2022
Closest in time.
Universal Robots, “UR5 collaborative robot arm,” https://www.universal-robots.com/products/ur5-robot/ , 2022, (accessed Oct. 31, 2022)
2022
Closest in time.
ABB, “IRB 14000 YuMi - collaborative robot,” https://new.abb.com/products/robotics/collaborative-robots/yumi/irb-14000-yumi , 2022, (accessed Oct. 31, 2022)
2022
Closest in time.
Robotics Research Corporation, “Dexterous manipulators and advanced control systems,” Robotics Research Corporation, Tech. Rep., 2005, Accessed Oct. 31, 2022. [Online]. Available: http://www.robotics-research.com/RRCTechDoc.PDF
2022
Closest in time.
A. Malik, Y. Lischuk, T. Henderson, and R. Prazenica, “A deep reinforcement-learning approach for inverse kinematics solution of a high degree of freedom robotic manipulator,” Robotics , vol. 11, no. 2, p. 44, 2022
2022
Closest in time.
B. Ames, J. Morgan, and G. Konidaris, “IKFlow: Generating diverse inverse kinematics solutions,” IEEE Robotics and Automation Letters , vol. 7, no. 3, pp. 7177–7184, 2022
2022
Closest in time.
T. Song, B. Pan, G. Niu, J. Yan, and Y. Fu, “General closed-form inverse kinematics for arbitrary three-joint subproblems based on the product of exponential model,” Frontiers of Mechanical Engineering , vol. 17, no. 2, pp. 1–17, 2022
2022
Closest in time.
FANUC, “CRX-10iA/L,” https://crx.fanucamerica.com/fanuc-cobot-crx-10ia-l/ , 2023, (accessed Oct. 11, 2023)
2023
Closest in time.
I. A. Sucan and S. Chitta, “MoveIt,” https://moveit.ros.org , (accessed Jun. 14, 2023)
2023
Closest in time.
“Tesseract,” https://github.com/tesseract-robotics/tesseract , (accessed Jun. 14, 2023)
2023
Closest in time.
2023
Closest in time.
MATLAB, “Robotics system toolbox,” https://www.mathworks.com/products/robotics.html , (accessed Jun. 14, 2023)
2023
Closest in time.
Wolfram Research, Inc., “Mathematica, Version 13.3,” Champaign, IL, 2023. [Online]. Available: https://www.wolfram.com/mathematica
2023
Closest in time.
2023
Closest in time.
Kassow Robots, “7 axis collaborative robot arm KR series,” https://www.kassowrobots.com/products/7-axis-collaborative-robot-arm-kr-series , 2024, (accessed Feb. 14, 2024)
2024
Closest in time.
Kawasaki Robotics, “KJ125,” https://kawasakirobotics.com/products-robots/kj125/ , 2024, (accessed Feb. 14, 2024)
2024
Closest in time.
Maplesoft, a division of Waterloo Maple Inc., “How maple compares to mathematica,” 2015, Accessed January 12, 2024. [Online]. Available: https://www.maplesoft.com/products/maple/compare/HowMapleComparestoMathematica.pdf
2024
Closest in time.