Fetching the paper…
Reading the bibliography…
Constraining contacts to remain fixed on an object during manipulation limits the potential workspace size, as motion is subject to the hand's kinematic topology.
J. Kerr and B. Roth, “Analysis of multifingered hands,” The International Journal of Robotics Research , vol. 4, no. 4, pp. 3–17, 1986
1986
Earlier work this paper cites.
D. L. Brock, “Enhancing the dexterity of a robot hand using controlled slip,” in Proceedings. 1988 IEEE International Conference on Robotics and Automation . IEEE, 1988, pp. 249–251
1988
Earlier work this paper cites.
D. J. Montana, “Contact Stability for Two-Fingered Grasps,” IEEE Transactions on Robotics and Automation , vol. 8, no. 4, pp. 421–430, 1992
1992
Earlier work this paper cites.
R. M. Murray, S. S. Sastry, and L. Zexiang, A Mathematical Introduction to Robotic Manipulation . USA: CRC Press, Inc., 1994
1994
Earlier work this paper cites.
J. C. Trinkle, J.-S. Pang, S. Sudarsky, and G. Lo, “On dynamic multi-rigid-body contact problems with coulomb friction,” Journal of Applied Mathematics and Mechanics , vol. 77, no. 4, pp. 267–279, 1997
1997
Earlier work this paper cites.
L. Han and J. C. Trinkle, “Dextrous manipulation by rolling and finger gaiting,” in Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No. 98CH36146) , vol. 1. IEEE, 1998, pp. 730–735
1998
Earlier work this paper cites.
A. Bicchi, “Hands for dexterous manipulation and robust grasping: A difficult road toward simplicity,” IEEE Transactions on robotics and automation , vol. 16, no. 6, pp. 652–662, 2000
2000
Earlier work this paper cites.
J. J. Craig, Introduction to robotics: mechanics and control, 3/E . Pearson Education India, 2009
2009
Earlier work this paper cites.
D. Huynh, “Metrics for 3d rotations: Comparison and analysis,” Journal of Mathematical Imaging and Vision , vol. 35, pp. 155–164, 10 2009
2009
Earlier work this paper cites.
A. M. Dollar and R. D. Howe, “The Highly Adaptive SDM Hand: Design and Performance Evaluation,” The International Journal of Robotics Research , vol. 29, no. 5, pp. 585–597, apr 2010
2010
Earlier work this paper cites.
K. Hauser and J.-C. Latombe, “Multi-modal motion planning in non-expansive spaces,” The International Journal of Robotics Research , vol. 29, no. 7, pp. 897–915, 2010
2010
Earlier work this paper cites.
M. Zucker, N. Ratliff, A. D. Dragan, M. Pivtoraiko, M. Klingensmith, C. M. Dellin, J. A. Bagnell, and S. S. Srinivasa, “Chomp: Covariant hamiltonian optimization for motion planning,” The International Journal of Robotics Research , vol. 32, no. 9-10, pp. 1164–1193, 2013
2013
Earlier work this paper cites.
R. R. Ma and A. M. Dollar, “An underactuated hand for efficient finger-gaiting-based dexterous manipulation,” in 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO 2014) . IEEE, 2014, pp. 2214–2219
2014
Cited alongside, same era.
Z. Su, K. Hausman, Y. Chebotar, A. Molchanov, G. E. Loeb, G. S. Sukhatme, and S. Schaal, “Force estimation and slip detection/classification for grip control using a biomimetic tactile sensor,” in 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids) . IEEE, 2015, pp. 297–303
2015
Cited alongside, same era.
K. Hang, M. Li, J. A. Stork, Y. Bekiroglu, F. T. Pokorny, A. Billard, and D. Kragic, “Hierarchical fingertip space: A unified framework for grasp planning and in-hand grasp adaptation,” IEEE Transactions on robotics , vol. 32, no. 4, pp. 960–972, 2016
2016
Cited alongside, same era.
B. Calli and A. M. Dollar, “Vision-based model predictive control for within-hand precision manipulation with underactuated grippers,” in 2017 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2017, pp. 2839–2845
B. Wen, C. Mitash, S. Soorian, A. Kimmel, A. Sintov, and K. E. Bekris, “Robust, occlusion-aware pose estimation for objects grasped by adaptive hands,” in 2020 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2020, pp. 6210–6217
2020
Later among the works it cites.
S. Yuan, L. Shao, C. L. Yako, A. Gruebele, and J. K. Salisbury, “Design and control of roller grasper v2 for in-hand manipulation,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , 2020, pp. 9151–9158
2020
Later among the works it cites.
Z. Kingston, A. M. Wells, M. Moll, and L. E. Kavraki, “Informing multi-modal planning with synergistic discrete leads,” in 2020 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2020, pp. 3199–3205
2020
Later among the works it cites.
A. S. Morgan, K. Hang, and A. M. Dollar, “Object-agnostic dexterous manipulation of partially constrained trajectories,” IEEE Robotics and Automation Letters , vol. 5, no. 4, pp. 5494–5501, 2020
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
2017
Cited alongside, same era.
B. Sundaralingam and T. Hermans, “Geometric in-hand regrasp planning: Alternating optimization of finger gaits and in-grasp manipulation,” in 2018 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2018, pp. 231–238
2018
Cited alongside, same era.
A. Sintov, A. S. Morgan, A. Kimmel, A. M. Dollar, K. E. Bekris, and A. Boularias, “Learning a state transition model of an underactuated adaptive hand,” IEEE Robotics and Automation Letters , vol. 4, no. 2, pp. 1287–1294, 2019
2019
Cited alongside, same era.
K. Hang, A. S. Morgan, and A. M. Dollar, “Pre-grasp sliding manipulation of thin objects using soft, compliant, or underactuated hands,” IEEE Robotics and Automation Letters , vol. 4, no. 2, pp. 662–669, 2019
2019
Cited alongside, same era.
R. H. N. Chavan-Dafle and A. Rodriguez, “Planar in-hand manipulation via motion cones,” IJRR , 2019
2019
Cited alongside, same era.
O. M. Andrychowicz, B. Baker, M. Chociej, R. Jozefowicz, B. McGrew, J. Pachocki, A. Petron, M. Plappert, G. Powell, A. Ray et al. , “Learning dexterous in-hand manipulation,” The International Journal of Robotics Research , vol. 39, no. 1, pp. 3–20, 2020
2020
Cited alongside, same era.
S. Abondance, C. B. Teeple, and R. J. Wood, “A dexterous soft robotic hand for delicate in-hand manipulation,” IEEE Robotics and Automation Letters , vol. 5, no. 4, pp. 5502–5509, 2020
2020
Cited alongside, same era.
B. Wen, C. Mitash, B. Ren, and K. E. Bekris, “se (3)-tracknet: Data-driven 6d pose tracking by calibrating image residuals in synthetic domains,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) . IEEE, 2020, pp. 10 367–10 373
2020
Cited alongside, same era.
2020
Later among the works it cites.
S. Cruciani, B. Sundaralingam, K. Hang, V. Kumar, T. Hermans, and D. Kragic, “Benchmarking in-hand manipulation,” IEEE Robotics and Automation Letters , vol. 5, no. 2, pp. 588–595, 2020
2020
Later among the works it cites.
G. Khandate, M. Haas-Heger, and M. Ciocarlie, “On the feasibility of learning finger-gaiting in-hand manipulation with intrinsic sensing,” 2021
2021
Later among the works it cites.
A. Bhatt, A. Sieler, S. Puhlmann, and O. Brock, “Surprisingly robust in-hand manipulation: An empirical study-supplementary material,” 2021
2021
Later among the works it cites.
K. Hang, W. G. Bircher, A. S. Morgan, and A. M. Dollar, “Manipulation for self-identification, and self-identification for better manipulation,” Science Robotics , vol. 6, no. 54, 2021
2021
Later among the works it cites.
A. Morgan, B. Wen, J. Liang, A. Boularias, A. Dollar, and K. Bekris, “Vision-driven compliant manipulation for reliable; high-precision assembly tasks,” Robotics: Science and Systems XVII , Jul 2021
2021
Later among the works it cites.
W. G. Bircher, A. S. Morgan, and A. M. Dollar, “Complex manipulation with a simple robotic hand through contact breaking and caging,” Science Robotics , vol. 6, no. 54, 2021. [Online]. Available: https://robotics.sciencemag.org/content/6/54/eabd2666
2021
Later among the works it cites.
2021
Later among the works it cites.