Fetching the paper…
Reading the bibliography…
In this survey, we present the current status on robots performing manipulation tasks that require varying contact with the environment, such that the robot must either implicitly or explicitly control the contact force with the environment to complete the task.
R. L. Hardy, “Multiquadric equations of topography and other irregular surfaces,” Journal of geophysical research
1971
Earlier work this paper cites.
H. Inoue, “Force feedback in precise assembly tasks,” 1974
1974
Earlier work this paper cites.
P. M. Will and D. D. Grossman, “An experimental system for computer controlled mechanical assembly,” IEEE Transactions on computers
1975
Earlier work this paper cites.
D. E. Whitney, “Force Feedback Control of Manipulator Fine Motions,” Journal of Dynamic Systems, Measurement, and Control
1977
Earlier work this paper cites.
M. H. Raibert and J. J. Craig, “Hybrid position/force control of manipulators,” Journal of Dynamic Systems, Measurement, and Control
1981
Earlier work this paper cites.
M. T. Mason, “Compliance and force control for computer controlled manipulators,” IEEE Transactions on Systems, Man, and Cybernetics
1981
Earlier work this paper cites.
D. E. Whitney, “Quasi-static assembly of compliantly supported rigid parts,” Journal of Dynamic Systems, Measurement, and Control
1982
Earlier work this paper cites.
T. Lozano-Perez, M. T. Mason, and R. H. Taylor, “Automatic synthesis of fine-motion strategies for robots,” The International Journal of Robotics Research
1984
Earlier work this paper cites.
K. Collins, A. Palmer, and K. Rathmill, “The development of a european benchmark for the comparison of assembly robot programming systems,” in Robot technology and applications
1985
Earlier work this paper cites.
N. Hogan, “Impedance control: An approach to manipulation: Part ii—implementation,” Journal of dynamic systems, measurement, and control
1985
Earlier work this paper cites.
D. E. Whitney, “Historical perspective and state of the art in robot force control,” in 1985 IEEE International Conference on Robotics and Automation (ICRA)
1985
Earlier work this paper cites.
M. Erdmann, “Using backprojections for fine motion planning with uncertainty,” The International Journal of Robotics Research (IJRR)
1986
Earlier work this paper cites.
N. Hogan, “Stable execution of contact tasks using impedance control,” in 1987 IEEE International Conference on Robotics and Automation (ICRA)
1987
Earlier work this paper cites.
J. Canny and J. Reif, “New lower bound techniques for robot motion planning problems,” in Foundations of Computer Science, 1987., 28th Annual Symposium on
1987
Earlier work this paper cites.
J. D. Schutter and H. V. Brussel, “Compliant robot motion i. a formalism for specifying compliant motion tasks,” The International Journal of Robotics Research
1988
Earlier work this paper cites.
M. Erdmann and M. T. Mason, “An exploration of sensorless manipulation,” IEEE Journal of Robotics and Automation
1988
Earlier work this paper cites.
E. Colgate and N. Hogan, “An analysis of contact instability in terms of passive physical equivalents,” in Proceedings, 1989 international conference on robotics and automation
1989
Earlier work this paper cites.
J. Canny, “On computability of fine motion plans,” in 1989 IEEE International Conference on Robotics and Automation (ICRA)
1989
Earlier work this paper cites.
J. M. Schimmels and M. A. Peshkin, “Force-assemblability: Insertion of a workpiece into a fixture guided by contact forces alone,” in 1991 IEEE International Conference on Robotics and Automation (ICRA)
1991
Earlier work this paper cites.
J. Schimmels and M. Peshkin, “Admittance matrix design for force-guided assembly,” IEEE Transactions on Robotics and Automation
1992
Earlier work this paper cites.
T. Yoshikawa and A. Sudou, “Dynamic hybrid position/force control of robot manipulators-on-line estimation of unknown constraint,” IEEE Transactions on Robotics and Automation
1993
Earlier work this paper cites.
H. Seraji, “Adaptive admittance control: an approach to explicit force control in compliant motion,” in 1994 IEEE International Conference on Robotics and Automation (ICRA)
1994
Earlier work this paper cites.
K. Yu and K. Goldberg, “Fixture loading with sensor-based motion plans,” in Proceedings of the 1995 IEEE International Symposium on Assembly and Task Planning
1995
Earlier work this paper cites.
Y. Yamada, S. Nagamatsu, and Y. Sato, “Development of multi-arm robots for automobile assembly,” in 1995 IEEE International Conference on Robotics and Automation (ICRA)
1995
Earlier work this paper cites.
Q. Wang, J. De Schutter, W. Witvrouw, and S. Graves, “Derivation of compliant motion programs based on human demonstration,” in Proceedings of IEEE International Conference on Robotics and Automation
1996
Earlier work this paper cites.
G. E. Hovland, P. Sikka, and B. J. McCarragher, “Skill acquisition from human demonstration using a hidden markov model,” in 1996 IEEE International Conference on Robotics and Automation (ICRA)
1996
Earlier work this paper cites.
G. Niemeyer and J.-J. Slotine, “A simple strategy for opening an unknown door,” in IEEE International Conference on Robotics and Automation
1997
Earlier work this paper cites.
K. Yu and K. Y. Goldberg, “A complete algorithm for fixture loading,” The International Journal of Robotics Research
1998
Earlier work this paper cites.
J. De Schutter, H. Bruyninckx, S. Dutré, J. De Geeter, J. Katupitiya, S. Demey, and T. Lefebvre, “Estimating first-order geometric parameters and monitoring contact transitions during force-controlled compliant motion,” The International Journal of Robotics Research
1999
Earlier work this paper cites.
F.-Y. Hsu and L.-C. Fu, “Intelligent robot deburring using adaptive fuzzy hybrid position/force control,” IEEE Transactions on Robotics and Automation
2000
Earlier work this paper cites.
Kluwer Academic Publishers, 2000
B. Siciliano and L. Villani, Robot Force Control · 2000
Earlier work this paper cites.
W. S. Newman, Y. Zhao, and Y.-H. Pao, “Interpretation of force and moment signals for compliant peg-in-hole assembly,” in 2001 IEEE International Conference on Robotics and Automation (ICRA)
2001
Earlier work this paper cites.
Xuerong Ji and Jing Xiao, “Planning motion compliant to complex contact states,” in IEEE International Conference on Robotics and Automation (ICRA)
2001
Earlier work this paper cites.
J. Roy and L. Whitcomb, “Adaptive force control of position/velocity controlled robots: theory and experiment,” IEEE Transactions on Robotics and Automation
2002
Earlier work this paper cites.
H. Urbanek, A. Albu-Schaffer, and P. van der Smagt, “Learning from demonstration: repetitive movements for autonomous service robotics,” in 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2004
Earlier work this paper cites.
R. Zollner, T. Asfour, and R. Dillmann, “Programming by demonstration: Dual-arm manipulation tasks for humanoid robots,” in 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2004
Earlier work this paper cites.
T. Siméon, J.-P. Laumond, J. Cortés, and A. Sahbani, “Manipulation planning with probabilistic roadmaps,” The International Journal of Robotics Research (IJRR)
2004
Earlier work this paper cites.
K. Gadeyne, T. Lefebvre, and H. Bruyninckx, “Bayesian hybrid model-state estimation applied to simultaneous contact formation recognition and geometrical parameter estimation,” The International Journal of Robotics Research
2005
Earlier work this paper cites.
T. Lefebvre, H. Bruyninckx, and J. De Schutter, “Online statistical model recognition and state estimation for autonomous compliant motion,” IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews)
2005
Earlier work this paper cites.
T. Lefebvre, H. Bruyninckx, and J. De Schutter, “Polyhedral contact formation identification for autonomous compliant motion: Exact nonlinear bayesian filtering,” IEEE Transactions on Robotics
2005
Earlier work this paper cites.
S. Schaal, “Dynamic movement primitives-a framework for motor control in humans and humanoid robotics,” in Adaptive motion of animals and machines
2006
Earlier work this paper cites.
W. Meeussen, J. Rutgeerts, K. Gadeyne, H. Bruyninckx, and J. De Schutter, “Contact-state segmentation using particle filters for programming by human demonstration in compliant-motion tasks,” IEEE Transactions on Robotics
2007
Earlier work this paper cites.
Z. Doulgeri and Y. Karayiannidis, “Force position control for a robot finger with a soft tip and kinematic uncertainties,” Robotics and Autonomous Systems
2007
Earlier work this paper cites.
Z. Doulgeri and Y. Karayiannidis, “Performance analysis of a soft tip robotic finger controlled by a parallel force/position regulator under kinematic uncertainties,” IET Control Theory and Applications
2007
Earlier work this paper cites.
Z. Doulgeri and Y. Karayiannidis, “Force/position tracking of a robot in compliant contact with unknown stiffness and surface kinematics,” in Proceedings - IEEE International Conference on Robotics and Automation
2007
Earlier work this paper cites.
S. Calinon, F. Guenter, and A. Billard, “On learning, representing, and generalizing a task in a humanoid robot,” IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics)
2007
Earlier work this paper cites.
J. A. Marshall, P. F. Murphy, and L. K. Daneshmend, “Toward autonomous excavation of fragmented rock: full-scale experiments,” IEEE Transactions on Automation Science and Engineering
2008
Earlier work this paper cites.
Z. Doulgeri and Y. Karayiannidis, “Force/position regulation for a robot in compliant contact using adaptive surface slope identification,” IEEE Transactions on Automatic Control
2008
Earlier work this paper cites.
B. D. Argall, S. Chernova, M. Veloso, and B. Browning, “A survey of robot learning from demonstration,” Robotics and autonomous systems
2009
Earlier work this paper cites.
Y. Karayiannidis and Z. Doulgeri, “Adaptive control of robot contact tasks with on-line learning of planar surfaces,” Automatica
2009
Earlier work this paper cites.
R. Tedrake, “Lqr-trees: Feedback motion planning on sparse randomized trees,” in Proceedings of Robotics: Science and Systems
2009
Earlier work this paper cites.
E. Lutscher, M. Lawitzky, G. Cheng, and S. Hirche, “A control strategy for operating unknown constrained mechanisms,” in IEEE International Conference on Robotics and Automation
2010
Earlier work this paper cites.
S. Calinon, I. Sardellitti, and D. G. Caldwell, “Learning-based control strategy for safe human-robot interaction exploiting task and robot redundancies,” in 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2010
Earlier work this paper cites.
Y. Karayiannidis and Z. Doulgeri, “Robot contact tasks in the presence of control target distortions,” Robotics and Autonomous Systems
2010
Earlier work this paper cites.
A. Rodriguez, D. Bourne, M. Mason, G. F. Rossano, and J. Wang, “Failure detection in assembly: Force signature analysis,” in 2010 IEEE International Conference on Automation Science and Engineering
2010
Earlier work this paper cites.
C. Chao, M. Cakmak, and A. L. Thomaz, “Transparent active learning for robots,” in Proceedings of the 2010 ACM/IEEE International Conference on Human-Robot Interaction (HRI)
2010
Earlier work this paper cites.
A. Stolt, M. Linderoth, A. Robertsson, and R. Johansson, “Force controlled assembly of emergency stop button,” in 2011 IEEE International Conference on Robotics and Automation
2011
Earlier work this paper cites.
V. Koropouli, D. Lee, and S. Hirche, “Learning interaction control policies by demonstration,” in 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems
2011
Earlier work this paper cites.
E. Gribovskaya, A. Kheddar, and A. Billard, “Motion learning and adaptive impedance for robot control during physical interaction with humans,” in 2011 IEEE International Conference on Robotics and Automation
2011
Earlier work this paper cites.
R. L. A. Shauri and K. Nonami, “Assembly manipulation of small objects by dual-arm manipulator,” Assembly Automation
2011
Earlier work this paper cites.
S. M. Khansari-Zadeh and A. Billard, “Learning stable nonlinear dynamical systems with gaussian mixture models,” IEEE Transactions on Robotics
2011
Earlier work this paper cites.
M. Kalakrishnan, L. Righetti, P. Pastor, and S. Schaal, “Learning force control policies for compliant manipulation,” in 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2011
Earlier work this paper cites.
E. Lutscher and G. Cheng, “A set-point-generator for indirect-force-controlled manipulators operating unknown constrained mechanisms,” in 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems
2012
Earlier work this paper cites.
Y. Karayiannidis, C. Smith, F. E. Vina, P. Ogren, and D. Kragic, ““Open sesame!” adaptive force/velocity control for opening unknown doors,” in 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems
2012
Earlier work this paper cites.
K. Kronander and A. Billard, “Online learning of varying stiffness through physical human-robot interaction,” in 2012 IEEE International Conference on Robotics and Automation (ICRA)
2012
Earlier work this paper cites.
C. Smith, Y. Karayiannidis, L. Nalpantidis, X. Gratal, P. Qi, D. V. Dimarogonas, and D. Kragic, “Dual arm manipulation—a survey,” Robotics and Autonomous systems
2012
Earlier work this paper cites.
A. Stolt, M. Linderoth, A. Robertsson, and R. Johansson, “Force controlled robotic assembly without a force sensor,” in 2012 IEEE International Conference on Robotics and Automation (ICRA)
2012
Earlier work this paper cites.
E. Di Lello, T. De Laet, and H. Bruyninckx, “Hierarchical dirichlet process hidden markov models for abnormality detection in robotic assembly,” in Neural Information Processing Systems
2012
Earlier work this paper cites.
G. Konidaris, S. Kuindersma, R. Grupen, and A. Barto, “Robot learning from demonstration by constructing skill trees,” The International Journal of Robotics Research
2012
Earlier work this paper cites.
S. Niekum, S. Osentoski, G. Konidaris, and A. G. Barto, “Learning and generalization of complex tasks from unstructured demonstrations,” in 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2012
Earlier work this paper cites.
E. Todorov, T. Erez, and Y. Tassa, “Mujoco: A physics engine for model-based control,” in 2012 IEEE/RSJ international conference on intelligent robots and systems
2012
Earlier work this paper cites.
J. Kober, J. A. Bagnell, and J. Peters, “Reinforcement learning in robotics: A survey,” The International Journal of Robotics Research
2013
Earlier work this paper cites.
Y. Karayiannidis, C. Smith, F. E. Vina, P. Ögren, and D. Kragic, “Model-free robot manipulation of doors and drawers by means of fixed-grasps,” in 2013 IEEE International Conference on Robotics and Automation
2013
Earlier work this paper cites.
L. Rozo Castañeda, S. Calinon, D. Caldwell, P. Jimenez Schlegl, and C. Torras, “Learning collaborative impedance-based robot behaviors,” in Proceedings of the Twenty-Seventh AAAI Conference on Artificial Intelligence
2013
Earlier work this paper cites.
J. Lee, P. H. Chang, and R. S. Jamisola, “Relative impedance control for dual-arm robots performing asymmetric bimanual tasks,” IEEE transactions on industrial electronics
2013
Earlier work this paper cites.
F. Ferraguti, C. Secchi, and C. Fantuzzi, “A tank-based approach to impedance control with variable stiffness,” in 2013 IEEE International Conference on Robotics and Automation (ICRA)
2013
Earlier work this paper cites.
G. de Chambrier and A. Billard, “Learning search behaviour from humans,” in 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO)
2013
Earlier work this paper cites.
A. Stolt, M. Linderoth, A. Robertsson, and R. Johansson, “Robotic assembly of emergency stop buttons,” in 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2013
Earlier work this paper cites.
S. Niekum and S. Chitta, “Incremental semantically grounded learning from demonstration.,” in Proceedings of Robotics: Science and Systems
2013
Earlier work this paper cites.
T. R. Savarimuthu, D. Liljekrans, L.-P. Ellekilde, A. Ude, B. Nemec, and N. Kruger, “Analysis of human peg-in-hole executions in a robotic embodiment using uncertain grasps,” in Robot Motion and Control (RoMoCo), 2013 9th Workshop on
2013
Earlier work this paper cites.
S. G. Khan, G. Herrmann, M. Al Grafi, T. Pipe, and C. Melhuish, “Compliance control and human–robot interaction: Part 1—survey,” International Journal of Humanoid Robotics
2014
Earlier work this paper cites.
Y. Chebotar, O. Kroemer, and J. Peters, “Learning robot tactile sensing for object manipulation,” in 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2014
Earlier work this paper cites.
C. W. Ng, K. H. Chan, W. K. Teo, and I.-M. Chen, “A method for capturing the tacit knowledge in the surface finishing skill by demonstration for programming a robot,” in 2014 IEEE International Conference on Robotics and Automation (ICRA)
2014
Earlier work this paper cites.
F. J. Abu-Dakka, B. Nemec, A. Kramberger, A. G. Buch, N. Krüger, and A. Ude, “Solving peg-in-hole tasks by human demonstration and exception strategies,” Industrial Robot: An International Journal
2014
Earlier work this paper cites.
I. F. Jasim, P. W. Plapper, and H. Voos, “Position identification in force-guided robotic peg-in-hole assembly tasks,” Procedia Cirp
2014
Earlier work this paper cites.
G. J. Maeda, D. C. Rye, and S. P. Singh, “Iterative autonomous excavation,” in Field and service robotics
2014
Earlier work this paper cites.
Y. Karayiannidis, C. Smith, F. E. Vina, and D. Kragic, “Online contact point estimation for uncalibrated tool use,” in 2014 IEEE International Conference on Robotics and Automation (ICRA)
2014
Earlier work this paper cites.
K. Kronander and A. Billard, “Learning compliant manipulation through kinesthetic and tactile human-robot interaction,” IEEE Transactions on Haptics
2014
Earlier work this paper cites.
O. Kroemer, H. Van Hoof, G. Neumann, and J. Peters, “Learning to predict phases of manipulation tasks as hidden states,” in 2014 IEEE International Conference on Robotics and Automation (ICRA)
2014
Cited alongside, same era.
A. Gams, B. Nemec, A. J. Ijspeert, and A. Ude, “Coupling movement primitives: Interaction with the environment and bimanual tasks,” IEEE Transactions on Robotics
2014
Cited alongside, same era.
M. Toussaint, N. Ratliff, J. Bohg, L. Righetti, P. Englert, and S. Schaal, “Dual execution of optimized contact interaction trajectories,” in 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems
2014
Cited alongside, same era.
G. De Chambrier and A. Billard, “Learning search polices from humans in a partially observable context,” Robotics and Biomimetics
2014
Cited alongside, same era.
T. Petrič, A. Gams, L. Colasanto, A. J. Ijspeert, and A. Ude, “Accelerated sensorimotor learning of compliant movement primitives,” IEEE Transactions on Robotics
2018
Later among the works it cites.
M. Karlsson, A. Robertsson, and R. Johansson, “Detection and control of contact force transients in robotic manipulation without a force sensor,” in 2018 IEEE International Conference on Robotics and Automation (ICRA)
2018
Later among the works it cites.
E. Páll, A. Sieverling, and O. Brock, “Contingent contact-based motion planning,” in 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2018
Later among the works it cites.
F. Wirnshofer, P. S. Schmitt, W. Feiten, G. v. Wichert, and W. Burgard, “Robust, compliant assembly via optimal belief space planning,” in 2018 IEEE International Conference on Robotics and Automation (ICRA)
2018
Later among the works it cites.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
A. Montebelli, F. Steinmetz, and V. Kyrki, “On handing down our tools to robots: Single-phase kinesthetic teaching for dynamic in-contact tasks,” in 2015 IEEE International Conference on Robotics and Automation (ICRA)
2015
Cited alongside, same era.
F. Steinmetz, A. Montebelli, and V. Kyrki, “Simultaneous kinesthetic teaching of positional and force requirements for sequential in-contact tasks,” in 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids)
2015
Cited alongside, same era.
F. J. Abu-Dakka, B. Nemec, J. A. Jørgensen, T. R. Savarimuthu, N. Krüger, and A. Ude, “Adaptation of manipulation skills in physical contact with the environment to reference force profiles,” Autonomous Robots
2015
Cited alongside, same era.
A. Carrera, N. Palomeras, N. Hurtós, P. Kormushev, and M. Carreras, “Learning multiple strategies to perform a valve turning with underwater currents using an I-AUV,” in OCEANS 2015-Genova
2015
Cited alongside, same era.
Luleå tekniska universitet, 2015
S. Dadhich, A survey in automation of earth-moving machines · 2015
Cited alongside, same era.
A. L. P. Ureche, K. Umezawa, Y. Nakamura, and A. Billard, “Task parameterization using continuous constraints extracted from human demonstrations,” IEEE Transactions on Robotics
2015
Cited alongside, same era.
J. Koivumäki and J. Mattila, “High performance nonlinear motion/force controller design for redundant hydraulic construction crane automation,” Automation in construction
2015
Cited alongside, same era.
J. Koivumäki and J. Mattila, “Stability-guaranteed force-sensorless contact force/motion control of heavy-duty hydraulic manipulators,” IEEE Transactions on Robotics
2015
Cited alongside, same era.
R. S. Sutton and A. G. Barto, Reinforcement learning: An introduction · 2018
Later among the works it cites.
L. Peternel, T. Petrič, and J. Babič, “Robotic assembly solution by human-in-the-loop teaching method based on real-time stiffness modulation,” Autonomous Robots
2018
Later among the works it cites.
A. Sena, Y. Zhao, and M. J. Howard, “Teaching human teachers to teach robot learners,” in 2018 IEEE International Conference on Robotics and Automation (ICRA)
2018
Later among the works it cites.
A. Bestick, R. Pandya, R. Bajcsy, and A. D. Dragan, “Learning human ergonomic preferences for handovers,” in 2018 IEEE International Conference on Robotics and Automation (ICRA)
2018
Later among the works it cites.
X. B. Peng, M. Andrychowicz, W. Zaremba, and P. Abbeel, “Sim-to-real transfer of robotic control with dynamics randomization,” in 2018 IEEE international conference on robotics and automation (ICRA)
2018
Later among the works it cites.
J. S. Dyrstad, E. R. Øye, A. Stahl, and J. R. Mathiassen, “Teaching a robot to grasp real fish by imitation learning from a human supervisor in virtual reality,” in 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2018
Later among the works it cites.
T. Zhang, Z. McCarthy, O. Jowl, D. Lee, X. Chen, K. Goldberg, and P. Abbeel, “Deep imitation learning for complex manipulation tasks from virtual reality teleoperation,” in 2018 IEEE International Conference on Robotics and Automation (ICRA)
2018
Later among the works it cites.
2019
Later among the works it cites.
D. Leidner, G. Bartels, W. Bejjani, A. Albu-Schäffer, and M. Beetz, “Cognition-enabled robotic wiping: Representation, planning, execution, and interpretation,” Robotics and Autonomous Systems
2019
Later among the works it cites.
S. Hoppe, Z. Lou, D. Hennes, and M. Toussaint, “Planning approximate exploration trajectories for model-free reinforcement learning in contact-rich manipulation,” IEEE Robotics and Automation Letters
2019
Later among the works it cites.
Y. Qian, J. Yuan, S. Bao, and L. Gao, “Sensorless hybrid normal-force controller with surface prediction,” in 2019 IEEE International Conference on Robotics and Biomimetics (ROBIO)
2019
Later among the works it cites.
W. Amanhoud, M. Khoramshahi, and A. Billard, “A dynamical system approach to motion and force generation in contact tasks,” in Robotics: Science and Systems (RSS)
2019
Later among the works it cites.
D. Ehlers, M. Suomalainen, J. Lundell, and V. Kyrki, “Imitating human search strategies for assembly,” pp. 7821–7827, 2019
2019
Later among the works it cites.
M. Suomalainen, S. Calinon, E. Pignat, and V. Kyrki, “Improving dual-arm assembly by master-slave compliance,” in 2019 International Conference on Robotics and Automation (ICRA)
2019
Later among the works it cites.
S. Scherzinger, A. Roennau, and R. Dillmann, “Contact skill imitation learning for robot-independent assembly programming,” in 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2019
Later among the works it cites.
J. Luo, E. Solowjow, C. Wen, J. A. Ojea, A. M. Agogino, A. Tamar, and P. Abbeel, “Reinforcement learning on variable impedance controller for high-precision robotic assembly,” in 2019 International Conference on Robotics and Automation (ICRA)
2019
Later among the works it cites.
F. Wirnshofer, P. S. Schmitt, P. Meister, G. v. Wichert, and W. Burgard, “Robust, compliant assembly with elastic parts and model uncertainty,” in 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2019
Later among the works it cites.
F. Wirnshofer, P. S. Schmitt, P. Meister, G. v. Wichert, and W. Burgard, “State estimation in contact-rich manipulation,” in 2019 International Conference on Robotics and Automation (ICRA)
2019
Later among the works it cites.
R. Martín-Martín and O. Brock, “Coupled recursive estimation for online interactive perception of articulated objects,” The International Journal of Robotics Research
2019
Later among the works it cites.
E. Shahriari, L. Johannsmeier, E. Jensen, and S. Haddadin, “Power flow regulation, adaptation, and learning for intrinsically robust virtual energy tanks,” IEEE Robotics and Automation Letters
2019
Later among the works it cites.
F. Ferraguti, C. Talignani Landi, L. Sabattini, M. Bonfè, C. Fantuzzi, and C. Secchi, “A variable admittance control strategy for stable physical human–robot interaction,” The International Journal of Robotics Research
2019
Later among the works it cites.
Y. Huang, L. Rozo, J. Silvério, and D. G. Caldwell, “Kernelized movement primitives,” The International Journal of Robotics Research
2019
Later among the works it cites.
R. Martín-Martín, M. A. Lee, R. Gardner, S. Savarese, J. Bohg, and A. Garg, “Variable impedance control in end-effector space: An action space for reinforcement learning in contact-rich tasks,” in 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2019
Later among the works it cites.
Y. Tsurumine, Y. Cui, E. Uchibe, and T. Matsubara, “Deep reinforcement learning with smooth policy update: Application to robotic cloth manipulation,” Robotics and Autonomous Systems
2019
Later among the works it cites.
K. Chin, T. Hellebrekers, and C. Majidi, “Machine learning for soft robotic sensing and control,” Advanced Intelligent Systems
2020
Later among the works it cites.
H. Ravichandar, A. S. Polydoros, S. Chernova, and A. Billard, “Recent advances in robot learning from demonstration,” Annual Review of Control, Robotics, and Autonomous Systems
2020
Later among the works it cites.
M. Braun and S. Wrede, “Incorporation of expert knowledge for learning robotic assembly tasks,” in 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)
2020
Later among the works it cites.
S. Gubbi, S. Kolathaya, and B. Amrutur, “Imitation learning for high precision peg-in-hole tasks,” in 2020 6th International Conference on Control, Automation and Robotics (ICCAR)
2020
Later among the works it cites.
W. Amanhoud, M. Khoramshahi, M. Bonnesoeur, and A. Billard, “Force adaptation in contact tasks with dynamical systems,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
2020
Later among the works it cites.
B. Maric, A. Mutka, and M. Orsag, “Collaborative human-robot framework for delicate sanding of complex shape surfaces,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
H. Zhang, L. Li, J. Zhao, J. Zhao, S. Liu, and J. Wu, “Design and implementation of hybrid force/position control for robot automation grinding aviation blade based on fuzzy pid,” The International Journal of Advanced Manufacturing Technology
2020
Later among the works it cites.
A. Kramberger, I. Iturrate, M. Deniša, S. Mathiesen, and C. Sloth, “Adapting learning by demonstration for robot based part feeding applications,” in 2020 IEEE/SICE International Symposium on System Integration (SII)
2020
Later among the works it cites.
Z. Hou, Z. Li, C. Hsu, K. Zhang, and J. Xu, “Fuzzy logic-driven variable time-scale prediction-based reinforcement learning for robotic multiple peg-in-hole assembly,” IEEE Transactions on Automation Science and Engineering
2020
Later among the works it cites.
G. Schoettler, A. Nair, J. A. Ojea, S. Levine, and E. Solowjow, “Meta-reinforcement learning for robotic industrial insertion tasks,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2020
Later among the works it cites.
C. C. Beltran-Hernandez, D. Petit, I. G. Ramirez-Alpizar, T. Nishi, S. Kikuchi, T. Matsubara, and K. Harada, “Learning force control for contact-rich manipulation tasks with rigid position-controlled robots,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
K. Nottensteiner, F. Stulp, and A. Albu-Schäffer, “Robust, locally guided peg-in-hole using impedance-controlled robots,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
2020
Later among the works it cites.
H. Park, J. Park, D.-H. Lee, J.-H. Park, and J.-H. Bae, “Compliant peg-in-hole assembly using partial spiral force trajectory with tilted peg posture,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
S. A. Khader, H. Yin, P. Falco, and D. Kragic, “Stability-guaranteed reinforcement learning for contact-rich manipulation,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
L. Shao, T. Migimatsu, and J. Bohg, “Learning to scaffold the development of robotic manipulation skills,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
2020
Later among the works it cites.
M. Kaspar, J. D. Muñoz Osorio, and J. Bock, “Sim2real transfer for reinforcement learning without dynamics randomization,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2020
Later among the works it cites.
P. Egli and M. Hutter, “Towards rl-based hydraulic excavator automation,” in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2020)
2020
Later among the works it cites.
M. Khoramshahi, G. Henriks, A. Naef, S. S. M. Salehian, J. Kim, and A. Billard, “Arm-hand motion-force coordination for physical interactions with non-flat surfaces using dynamical systems: Toward compliant robotic massage,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
2020
Later among the works it cites.
L. B. Chernyakhovskaya and D. A. Simakov, “Peg-on-hole: mathematical investigation of motion of a peg and of forces of its interaction with a vertically fixed hole during their alignment with a three-point contact,” The International Journal of Advanced Manufacturing Technology
2020
Later among the works it cites.
A. Salem and Y. Karayiannidis, “Robotic assembly of rounded parts with and without threads,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
K. Kimble, K. Van Wyk, J. Falco, E. Messina, Y. Sun, M. Shibata, W. Uemura, and Y. Yokokohji, “Benchmarking protocols for evaluating small parts robotic assembly systems,” IEEE robotics and automation letters
2020
Later among the works it cites.
M. Bednarczyk, H. Omran, and B. Bayle, “Passivity filter for variable impedance control,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2020
Later among the works it cites.
L. Roveda, M. Magni, M. Cantoni, D. Piga, and G. Bucca, “Assembly task learning and optimization through human’s demonstration and machine learning,” in 2020 IEEE International Conference on Systems, Man, and Cybernetics (SMC)
2020
Later among the works it cites.
M. d. P. A. Fonseca, B. V. Adorno, and P. Fraisse, “Coupled task-space admittance controller using dual quaternion logarithmic mapping,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
N. Chavan-Dafle, R. Holladay, and A. Rodriguez, “Planar in-hand manipulation via motion cones,” The International Journal of Robotics Research (IJRR)
2020
Later among the works it cites.
E. Valassakis, Z. Ding, and E. Johns, “Crossing the gap: A deep dive into zero-shot sim-to-real transfer for dynamics,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2020
Later among the works it cites.
M. Bogdanovic, M. Khadiv, and L. Righetti, “Learning variable impedance control for contact sensitive tasks,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
K. Arndt, M. Hazara, A. Ghadirzadeh, and V. Kyrki, “Meta reinforcement learning for sim-to-real domain adaptation,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
2020
Later among the works it cites.
S. James, Z. Ma, D. R. Arrojo, and A. J. Davison, “Rlbench: The robot learning benchmark & learning environment,” IEEE Robotics and Automation Letters
2020
Later among the works it cites.
T. Yu, D. Quillen, Z. He, R. Julian, K. Hausman, C. Finn, and S. Levine, “Meta-world: A benchmark and evaluation for multi-task and meta reinforcement learning,” in Conference on Robot Learning
2020
Later among the works it cites.
F. Xiang, Y. Qin, K. Mo, Y. Xia, H. Zhu, F. Liu, M. Liu, H. Jiang, Y. Yuan, H. Wang, et al
2020
Later among the works it cites.
A. Sena and M. Howard, “Quantifying teaching behavior in robot learning from demonstration,” The International Journal of Robotics Research
2020
Later among the works it cites.
F. Dimeas and Z. Doulgeri, “Progressive automation of periodic tasks on planar surfaces of unknown pose with hybrid force/position control,” in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2020
Later among the works it cites.
V. Petrík, V. Smutnỳ, and V. Kyrki, “Static stability of robotic fabric strip folding,” IEEE/ASME Transactions on Mechatronics
2020
Later among the works it cites.
O. Kroemer, S. Niekum, and G. D. Konidaris, “A review of robot learning for manipulation: Challenges, representations, and algorithms,” Journal of machine learning research
2021
Closest in time.
B. Nemec, K. Yasuda, and A. Ude, “A virtual mechanism approach for exploiting functional redundancy in finishing operations,” IEEE Transactions on Automation Science and Engineering
2021
Closest in time.
M. Suomalainen, F. J. Abu-Dakka, and V. Kyrki, “Imitation learning-based framework for learning 6-D linear compliant motions,” Autonomous Robots
2021
Closest in time.
A. A. Apolinarska, M. Pacher, H. Li, N. Cote, R. Pastrana, F. Gramazio, and M. Kohler, “Robotic assembly of timber joints using reinforcement learning,” Automation in Construction
2021
Closest in time.
Z. Wu, W. Lian, V. Unhelkar, M. Tomizuka, and S. Schaal, “Learning dense rewards for contact-rich manipulation tasks,” 2021
2021
Closest in time.
Y. Ma, D. Xu, and F. Qin, “Efficient insertion control for precision assembly based on demonstration learning and reinforcement learning,” IEEE Transactions on Industrial Informatics
2021
Closest in time.
M. Oikawa, T. Kusakabe, K. Kutsuzawa, S. Sakaino, and T. Tsuji, “Reinforcement learning for robotic assembly using non-diagonal stiffness matrix,” IEEE Robotics and Automation Letters
2021
Closest in time.
Y. Hayami, W. Wan, K. Koyama, P. Shi, J. Rojas, and K. Harada, “Error identification and recovery in robotic snap assembly,” in 2021 IEEE/SICE International Symposium on System Integration (SII)
2021
Closest in time.
J. Yuan, N. Häni, and V. Isler, “Multi-step recurrent q-learning for robotic velcro peeling,” in 2021 IEEE International Conference on Robotics and Automation (ICRA)
2021
Closest in time.
2021
Closest in time.
I. Mitsioni, Y. Karayiannidis, and D. Kragic, “Modelling and learning dynamics for robotic food-cutting,” in 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE21)
2021
Closest in time.
A. Sidiropoulos, Y. Karayiannidis, and Z. Doulgeri, “Human-robot collaborative object transfer using human motion prediction based on cartesian pose dynamic movement primitives,” in 2021 IEEE International Conference on Robotics and Automation (ICRA)
2021
Closest in time.
A. T. Le, M. Guo, N. van Duijkeren, L. Rozo, R. Krug, A. G. Kupcsik, and M. Bürger, “Learning forceful manipulation skills from multi-modal human demonstrations,” in 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
2021
Closest in time.
K. Arndt, A. Ghadirzadeh, M. Hazara, and V. Kyrki, “Few-shot model-based adaptation in noisy conditions,” IEEE Robotics and Automation Letters
2021
Closest in time.
T. Eiband and D. Lee, “Identification of common force-based robot skills from the human and robot perspective,” in 2020 IEEE-RAS 20th International Conference on Humanoid Robots (Humanoids)
2021
Closest in time.
2021
Closest in time.
S. Shetty, J. Silverio, and S. Calinon, “Ergodic exploration using tensor train: Applications in insertion tasks,” IEEE Transactions on Robotics
2021
Closest in time.
D. Ortega-Aranda, J. F. Jimenez-Vielma, B. N. Saha, and I. Lopez-Juarez, “Dual-arm peg-in-hole assembly using dnn with double force/torque sensor,” Applied Sciences
2021
Closest in time.
C.-Y. Kuo, A. Schaarschmidt, Y. Cui, T. Asfour, and T. Matsubara, “Uncertainty-aware contact-safe model-based reinforcement learning,” IEEE Robotics and Automation Letters
2021
Closest in time.
Y. Wang, C. C. Beltran-Hernandez, W. Wan, and K. Harada, “Hybrid trajectory and force learning of complex assembly tasks: A combined learning framework,” IEEE Access
2021
Closest in time.
P. Kulkarni, J. Kober, R. Babuška, and C. Della Santina, “Learning assembly tasks in a few minutes by combining impedance control and residual recurrent reinforcement learning,” Advanced Intelligent Systems
2021
Closest in time.
R. Laezza, R. Gieselmann, F. T. Pokorny, and Y. Karayiannidis, “Reform: A robot learning sandbox for deformable linear object manipulation,” in 2021 IEEE International Conference on Robotics and Automation (ICRA)
2021
Closest in time.
M. Hagenow, B. Zhang, B. Mutlu, M. Zinn, and M. Gleicher, “Recognizing orientation slip in human demonstrations,” in 2021 IEEE International Conference on Robotics and Automation (ICRA)
2021
Closest in time.
M. Guo and M. Bürger, “Geometric task networks: Learning efficient and explainable skill coordination for object manipulation,” IEEE Transactions on Robotics
2021
Closest in time.
B. Belousov, B. Wibranek, J. Schneider, T. Schneider, G. Chalvatzaki, J. Peters, and O. Tessmann, “Robotic architectural assembly with tactile skills: Simulation and optimization,” Automation in Construction
2022
Closest in time.
P. Liu, D. Tateo, H. B. Ammar, and J. Peters, “Robot reinforcement learning on the constraint manifold,” in Conference on Robot Learning
2022
Closest in time.