Fetching the paper…
Reading the bibliography…
In this paper, we present an overview of robotic peg-in-hole assembly and analyze two main strategies: contact model-based and contact model-free strategies.
M. H. Raibert and J. J. Craig, “Hybrid position/force control of manipulators,” Journal of Dynamic Systems, Measurement, and Control , vol. 103, no. 2, pp. 126–133, 1981
1981
Earlier work this paper cites.
D. E. Whitney, “Quasi-static assembly of compliantly supported rigid parts,” Journal of Dynamic Systems, Measurement, and Control , vol. 104, no. 1, pp. 65–77, 1982
1982
Earlier work this paper cites.
N. Hogan, “Impedance control: An approach to manipulation,” in American Control Conference, 1984 . IEEE, 1984, pp. 304–313
1984
Earlier work this paper cites.
R. Desai, J. Xiao, and R. A. Volz, “Contact formations and design constraints: A new basis for the automatic generation of robot programs,” in CAD Based Programming for Sensory Robots , B. Ravani, Ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988, pp. 361–395
1988
Earlier work this paper cites.
B. Hannaford and P. Lee, “Hidden markov model analysis of force/torque information in telemanipulation,” The International journal of robotics research , vol. 10, no. 5, pp. 528–539, 1991
1991
Earlier work this paper cites.
R. S. Sutton, “Dyna, an integrated architecture for learning, planning, and reacting,” SIGART Bull. , vol. 2, no. 4, pp. 160–163, Jul. 1991. [Online]. Available: http://doi.acm.org/10.1145/122344.122377
1991
Earlier work this paper cites.
V. Gullapalli, R. A. Grupen, and A. G. Barto, “Learning reactive admittance control,” in Robotics and Automation, 1992. Proceedings., 1992 IEEE International Conference on . IEEE, 1992, pp. 1475–1480
1992
Earlier work this paper cites.
J. Xiao, “Automatic determination of topological contacts in the presence of sensing uncertainties,” in [1993] Proceedings IEEE International Conference on Robotics and Automation , May 1993, pp. 65–70 vol.1
1993
Earlier work this paper cites.
R. Sturges and S. Laowattana, “Design of an orthogonal compliance for polygonal peg insertion,” Journal of mechanical design , vol. 118, no. 1, pp. 106–114, 1996
1996
Earlier work this paper cites.
G. E. Hovland, P. Sikka, and B. J. McCarragher, “Skill acquisition from human demonstration using a hidden markov model,” in Proceedings of IEEE International Conference on Robotics and Automation , vol. 3, April 1996, pp. 2706–2711 vol.3
1996
Earlier work this paper cites.
M. Nuttin and H. Van Brussel, “Learning the peg-into-hole assembly operation with a connectionist reinforcement technique,” Computers in Industry , vol. 33, no. 1, pp. 101–109, 1997
1997
Earlier work this paper cites.
J. Miura and K. Ikeuchi, “Task-oriented generation of visual sensing strategies in assembly tasks,” IEEE Transactions on Pattern Analysis and Machine Intelligence , vol. 20, no. 2, pp. 126–138, 1998
1998
Earlier work this paper cites.
J. Xiao and L. Liu, “Contact states: representation and recognizability in the presence of uncertainties.” in IROS , 1998, pp. 1151–1156
1998
Earlier work this paper cites.
K. Sathirakul and R. H. Sturges, “Jamming conditions for multiple peg-in-hole assemblies,” Robotica , vol. 16, no. 3, pp. 329–345, 1998
1998
Earlier work this paper cites.
H.-T. Liao and M. C. Leu, “Analysis of impact in robotic peg-in-hole assembly,” Robotica , vol. 16, no. 3, pp. 347–356, 1998
1998
Earlier work this paper cites.
P. B. Petrović and V. R. Milačić, “A concept of an intelligent fuzzy control for assembly robot,” CIRP Annals , vol. 47, no. 1, pp. 9–12, 1998
1998
Earlier work this paper cites.
G. E. Hovland and B. J. McCarragher, “Hidden markov models as a process monitor in robotic assembly,” The International Journal of Robotics Research , vol. 17, no. 2, pp. 153–168, 1998
1998
Earlier work this paper cites.
M. Skubic and R. A. Volz, “Identifying single-ended contact formations from force sensor patterns,” IEEE Transactions on Robotics and Automation , vol. 16, no. 5, pp. 597–603, 2000
2000
Earlier work this paper cites.
J. Pauli, A. Schmidt, and G. Sommer, “Vision-based integrated system for object inspection and handling,” Robotics and Autonomous Systems , vol. 37, no. 4, pp. 297–309, 2001
2001
Earlier work this paper cites.
S. R. Chhatpar and M. S. Branicky, “Search strategies for peg-in-hole assemblies with position uncertainty,” in Intelligent Robots and Systems, 2001. Proceedings. 2001 IEEE/RSJ International Conference on , vol. 3. IEEE, 2001, pp. 1465–1470
2001
Earlier work this paper cites.
——, “A neural/fuzzy optimal process model for robotic part assembly,” International Journal of Machine Tools and Manufacture , vol. 41, no. 12, pp. 1783–1794, 2001
2001
Earlier work this paper cites.
L. M. Brignone and M. Howarth, “A geometrically validated approach to autonomous robotic assembly,” in IEEE/RSJ International Conference on Intelligent Robots and Systems , vol. 2, Sept 2002, pp. 1626–1631 vol.2
2002
Earlier work this paper cites.
C. Son, “Optimal control planning strategies with fuzzy entropy and sensor fusion for robotic part assembly tasks,” International Journal of Machine Tools and Manufacture , vol. 42, no. 12, pp. 1335–1344, 2002
2002
Earlier work this paper cites.
Y. Fei and X. Zhao, “An assembly process modeling and analysis for robotic multiple peg-in-hole,” Journal of Intelligent and Robotic Systems , vol. 36, no. 2, pp. 175–189, 2003
2003
Earlier work this paper cites.
H. Lau, “A hidden markov model-based assembly contact recognition system,” Mechatronics , vol. 13, no. 8-9, pp. 1001–1023, 2003
2003
Earlier work this paper cites.
R. Cortesão, R. Koeppe, U. Nunes, and G. Hirzinger, “Data fusion for robotic assembly tasks based on human skills,” IEEE Transactions on Robotics , vol. 20, no. 6, pp. 941–952, 2004
2004
Earlier work this paper cites.
T. J. Debus, P. E. Dupont, and R. D. Howe, “Contact state estimation using multiple model estimation and hidden markov models,” The International Journal of Robotics Research , vol. 23, no. 4-5, pp. 399–413, 2004
2004
Earlier work this paper cites.
P. Abbeel and A. Y. Ng, “Apprenticeship learning via inverse reinforcement learning,” in Proceedings of the twenty-first international conference on Machine learning . ACM, 2004, p. 1
2004
Earlier work this paper cites.
T. Lefebvre, J. Xiao, H. Bruyninckx, and G. De Gersem, “Active compliant motion: a survey,” Advanced Robotics , vol. 19, no. 5, pp. 479–499, 2005
2005
Earlier work this paper cites.
A. De Luca and R. Mattone, “Sensorless robot collision detection and hybrid force/motion control,” in Robotics and Automation, 2005. ICRA 2005. Proceedings of the 2005 IEEE International Conference on . IEEE, 2005, pp. 999–1004
2005
Earlier work this paper cites.
T. Lefebvre, H. Bruyninckx, and J. De Schutter, “Online statistical model recognition and state estimation for autonomous compliant motion,” IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews) , vol. 35, no. 1, pp. 16–29, 2005
2005
Earlier work this paper cites.
K. Gadeyne, T. Lefebvre, and H. Bruyninckx, “Bayesian hybrid model-state estimation applied to simultaneous contact formation recognition and geometrical parameter estimation,” The International Journal of Robotics Research , vol. 24, no. 8, pp. 615–630, 2005
2005
Earlier work this paper cites.
Y. Xia, Y. Yin, and Z. Chen, “Dynamic analysis for peg-in-hole assembly with contact deformation,” The International Journal of Advanced Manufacturing Technology , vol. 30, no. 1-2, pp. 118–128, 2006
2006
Earlier work this paper cites.
J. Wang, A. Liu, X. Tao, and H. Cho, “Microassembly of micropeg and-hole using uncalibrated visual servoing method,” Precision engineering , vol. 32, no. 3, pp. 173–181, 2008
2008
Cited alongside, same era.
A. Lopes and F. Almeida, “A force–impedance controlled industrial robot using an active robotic auxiliary device,” Robotics and Computer-Integrated Manufacturing , vol. 24, no. 3, pp. 299–309, 2008
2008
Cited alongside, same era.
D.-H. Park, H. Hoffmann, P. Pastor, and S. Schaal, “Movement reproduction and obstacle avoidance with dynamic movement primitives and potential fields,” in Humanoid Robots, 2008. Humanoids 2008. 8th IEEE-RAS International Conference on . IEEE, 2008, pp. 91–98
2008
Cited alongside, same era.
B. D. Argall, S. Chernova, M. Veloso, and B. Browning, “A survey of robot learning from demonstration,” Robotics and autonomous systems , vol. 57, no. 5, pp. 469–483, 2009
2009
Cited alongside, same era.
Q. Xu, “Robust impedance control of a compliant microgripper for high-speed position/force regulation.” IEEE Trans. Industrial Electronics , vol. 62, no. 2, pp. 1201–1209, 2015
2015
Later among the works it cites.
H. Qiao, M. Wang, J. Su, S. Jia, and R. Li, “The concept of “attractive region in environment” and its application in high-precision tasks with low-precision systems,” IEEE/ASME Transactions on Mechatronics , vol. 20, no. 5, pp. 2311–2327, 2015
2015
Later among the works it cites.
C. Paxton, G. D. Hager, L. Bascetta et al. , “An incremental approach to learning generalizable robot tasks from human demonstration,” in Robotics and Automation (ICRA), 2015 IEEE International Conference on . IEEE, 2015, pp. 5616–5621
2015
Later among the works it cites.
Z. Qin, P. Wang, J. Sun, J. Lu, and H. Qiao, “Precise robotic assembly for large-scale objects based on automatic guidance and alignment,” IEEE Transactions on Instrumentation and Measurement , vol. 65, no. 6, pp. 1398–1411, June 2016
2016
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
W.-F. Xie, Z. Li, X.-W. Tu, and C. Perron, “Switching control of image-based visual servoing with laser pointer in robotic manufacturing systems,” IEEE Transactions on Industrial Electronics , vol. 56, no. 2, pp. 520–529, 2009
2009
Cited alongside, same era.
F. Dietrich, D. Buchholz, F. Wobbe, F. Sowinski, A. Raatz, W. Schumacher, and F. M. Wahl, “On contact models for assembly tasks: Experimental investigation beyond the peg-in-hole problem on the example of force-torque maps,” in Intelligent Robots and Systems (IROS), 2010 IEEE/RSJ International Conference on . IEEE, 2010, pp. 2313–2318
2010
Cited alongside, same era.
S. Cabras, M. E. Castellanos, and E. Staffetti, “Contact-state classification in human-demonstrated robot compliant motion tasks using the boosting algorithm,” IEEE Transactions on Systems, Man and Cybernetics, Part B: Cybernetics , vol. 40, no. 5, pp. 1372–1386, 2010
2010
Cited alongside, same era.
A. Ude, A. Gams, T. Asfour, and J. Morimoto, “Task-specific generalization of discrete and periodic dynamic movement primitives,” IEEE Transactions on Robotics , vol. 26, no. 5, pp. 800–815, Oct 2010
2010
Cited alongside, same era.
S. Calinon, F. D’halluin, E. L. Sauser, D. G. Caldwell, and A. G. Billard, “Learning and reproduction of gestures by imitation,” IEEE Robotics & Automation Magazine , vol. 17, no. 2, pp. 44–54, 2010
2010
Cited alongside, same era.
S. Calinon, F. D’halluin, E. Sauser, D. Caldwell, and A. Billard, “A probabilistic approach based on dynamical systems to learn and reproduce gestures by imitation,” IEEE Robotics and Automation Magazine , vol. 17, no. 2, pp. 44–54, 2010
2010
Cited alongside, same era.
R. Chang, C. Lin, and P. Lin, “Visual-based automation of peg-in-hole microassembly process,” Journal of Manufacturing Science and Engineering , vol. 133, no. 4, p. 041015, 2011
2011
Cited alongside, same era.
B. Shirinzadeh, Y. Zhong, P. D. Tilakaratna, Y. Tian, and M. M. Dalvand, “A hybrid contact state analysis methodology for robotic-based adjustment of cylindrical pair,” The International Journal of Advanced Manufacturing Technology , vol. 52, no. 1-4, pp. 329–342, 2011
2011
Cited alongside, same era.
Later among the works it cites.
P. Nagarajan, S. S. Perumaal, and B. Yogameena, “Vision based pose estimation of multiple peg-in-hole for robotic assembly,” in International Conference on Computer Vision, Graphics, and Image processing . Springer, 2016, pp. 50–62
2016
Later among the works it cites.
T. Tang, H.-C. Lin, Y. Zhao, W. Chen, and M. Tomizuka, “Autonomous alignment of peg and hole by force/torque measurement for robotic assembly,” in Automation Science and Engineering (CASE), 2016 IEEE International Conference on . IEEE, 2016, pp. 162–167
2016
Later among the works it cites.
T. Tang, H.-C. Lin, Y. Zhao, Y. Fan, W. Chen, and M. Tomizuka, “Teach industrial robots peg-hole-insertion by human demonstration,” in Advanced Intelligent Mechatronics (AIM), 2016 IEEE International Conference on . IEEE, 2016, pp. 488–494
2016
Later among the works it cites.
H.-C. Song, Y.-L. Kim, and J.-B. Song, “Guidance algorithm for complex-shape peg-in-hole strategy based on geometrical information and force control,” Advanced Robotics , vol. 30, no. 8, pp. 552–563, 2016
2016
Later among the works it cites.
S. Cabras, M. Castellanos, and E. Staffetti, “A random forest application to contact-state classification for robot programming by human demonstration,” Applied Stochastic Models in Business and Industry , vol. 32, no. 2, pp. 209–227, 2016
2016
Later among the works it cites.
Y. Duan, X. Chen, R. Houthooft, J. Schulman, and P. Abbeel, “Benchmarking deep reinforcement learning for continuous control,” in International Conference on Machine Learning , 2016, pp. 1329–1338
2016
Later among the works it cites.
A. Venkatraman, R. Capobianco, L. Pinto, M. Hebert, D. Nardi, and J. A. Bagnell, “Improved learning of dynamics models for control,” in International Symposium on Experimental Robotics . Springer, 2016, pp. 703–713
2016
Later among the works it cites.
J. Su, R. Li, H. Qiao, J. Xu, Q. Ai, and J. Zhu, “Study on dual peg-in-hole insertion using of constraints formed in the environment,” Industrial Robot: An International Journal , vol. 44, no. 6, pp. 730–740, 2017
2017
Later among the works it cites.
A. Wan, J. Xu, H. Chen, S. Zhang, and K. Chen, “Optimal path planning and control of assembly robots for hard-measuring easy-deformation assemblies,” IEEE/ASME Transactions on Mechatronics , vol. 22, no. 4, pp. 1600–1609, 2017
2017
Later among the works it cites.
T. Inoue, G. D. Magistris, A. Munawar, T. Yokoya, and R. Tachibana, “Deep reinforcement learning for high precision assembly tasks,” in 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , Sept 2017, pp. 819–825
2017
Later among the works it cites.
I. F. Jasim, P. W. Plapper, and H. Voos, “Contact-state modelling in force-controlled robotic peg-in-hole assembly processes of flexible objects using optimised gaussian mixtures,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , vol. 231, no. 8, pp. 1448–1463, 2017
2017
Later among the works it cites.
A. S. Polydoros and L. Nalpantidis, “Survey of model-based reinforcement learning: Applications on robotics,” Journal of Intelligent & Robotic Systems , vol. 86, no. 2, pp. 153–173, 2017
2017
Later among the works it cites.
K. Zhang, M. Shi, J. Xu, F. Liu, and K. Chen, “Force control for a rigid dual peg-in-hole assembly,” Assembly Automation , vol. 37, no. 2, pp. 200–207, 2017
2017
Later among the works it cites.
H. Park, J. Park, D.-H. Lee, J.-H. Park, M.-H. Baeg, and J.-H. Bae, “Compliance-based robotic peg-in-hole assembly strategy without force feedback,” IEEE Transactions on Industrial Electronics , vol. 64, no. 8, pp. 6299–6309, 2017
2017
Later among the works it cites.
X. Li, R. Li, H. Qiao, C. Ma, and L. Li, “Human-inspired compliant strategy for peg-in-hole assembly using environmental constraint and coarse force information,” in 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , Sep. 2017, pp. 4743–4748
2017
Later among the works it cites.
R. Li and H. Qiao, “Condition and strategy analysis for assembly based on attractive region in environment,” IEEE/ASME Transactions on Mechatronics , vol. 22, no. 5, pp. 2218–2228, Oct 2017
2017
Later among the works it cites.
A. Kramberger, A. Gams, B. Nemec, D. Chrysostomou, O. Madsen, and A. Ude, “Generalization of orientation trajectories and force-torque profiles for robotic assembly,” Robotics and autonomous systems , vol. 98, pp. 333–346, 2017
2017
Later among the works it cites.
2017
Later among the works it cites.
Z. Zhu and H. Hu, “Robot learning from demonstration in robotic assembly: A survey,” Robotics , vol. 7, no. 2, p. 17, 2018
2018
Later among the works it cites.
R. S. Sutton and A. G. Barto, Reinforcement learning: An introduction . MIT press, 2018
2018
Later among the works it cites.
2018
Later among the works it cites.
J. Xu, Z. Hou, W. Wang, B. Xu, K. Zhang, and K. Chen, “Feedback deep deterministic policy gradient with fuzzy reward for robotic multiple peg-in-hole assembly tasks,” IEEE Transactions on Industrial Informatics , pp. 1–1, 2018
2018
Later among the works it cites.
Z. Hou, M. Philipp, K. Zhang, Y. Guan, K. Chen, and J. Xu, “The learning-based optimization algorithm for robotic dual peg-in-hole assembly,” Assembly Automation , vol. 38, no. 4, pp. 369–375, 2018
2018
Later among the works it cites.
M. Kyrarini, M. A. Haseeb, D. Ristić-Durrant, and A. Gräser, “Robot learning of industrial assembly task via human demonstrations,” Autonomous Robots , pp. 1–19, 2018
2018
Later among the works it cites.
2018
Later among the works it cites.
T. Ren, Y. Dong, D. Wu, and K. Chen, “Learning-based variable compliance control for robotic assembly,” Journal of Mechanisms and Robotics , vol. 10, no. 6, p. 061008, 2018
2018
Later among the works it cites.
2018
Later among the works it cites.
K. Zhang, J. Xu, H. Chen, J. Zhao, and K. Chen, “Jamming analysis and force control for flexible dual peg-in-hole assembly,” IEEE Transactions on Industrial Electronics , vol. 66, no. 3, pp. 1930–1939, March 2019
2019
Closest in time.
J. Luo, E. Solowjow, C. Wen, J. A. Ojea, and A. M. Agogino, “Deep reinforcement learning for robotic assembly of mixed deformable and rigid objects,” in 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , Oct 2018, pp. 2062–2069
2069
Closest in time.