Fetching the paper…
Reading the bibliography…
This paper presents a novel trajectory optimization formulation to solve the robotic assembly of the belt drive unit.
Y. F. Zheng, R. Pei, and C. Chen, “Strategies for automatic assembly of deformable objects,” in Proceedings. 1991 IEEE International Conference on Robotics and Automation , 1991, pp. 2598–2603 vol.3
1991
Earlier work this paper cites.
R. Fierro, A. K. Das, V. Kumar, and J. P. Ostrowski, “Hybrid control of formations of robots,” in Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164) , vol. 1, 2001, pp. 157–162 vol.1
2001
Earlier work this paper cites.
F. Lamiraux and L. E. Kavraki, “Planning paths for elastic objects under manipulation constraints,” The International Journal of Robotics Research , vol. 20, no. 3, pp. 188–208, 2001
2001
Earlier work this paper cites.
A. U. Raghunathan and L. T. Biegler, “An interior point method for mathematical programs with complementarity constraints (mpccs),” SIAM Journal on Optimization , vol. 15, no. 3, pp. 720–750, 2005
2005
Earlier work this paper cites.
K. Yunt and C. Glocker, “Trajectory optimization of mechanical hybrid systems using sumt,” in 9th IEEE International Workshop on Advanced Motion Control, 2006. IEEE, 2006, pp. 665–671
2006
Earlier work this paper cites.
M. Moll and L. E. Kavraki, “Path planning for deformable linear objects,” IEEE Transactions on Robotics , vol. 22, no. 4, pp. 625–636, 2006
2006
Earlier work this paper cites.
A. Wächter and L. T. Biegler, “On the implementation of an interior-point filter line-search algorithm for large-scale nonlinear programming,” Math. Program. , vol. 106, no. 1, p. 25–57, Mar. 2006
2006
Earlier work this paper cites.
K. Yunt and C. Glocker, “A combined continuation and penalty method for the determination of optimal hybrid mechanical trajectories,” in IUTAM Symposium on Dynamics and Control of Nonlinear Systems with Uncertainty . Springer, 2007, pp. 187–196
2007
Earlier work this paper cites.
Z.-Q. Luo, J.-S. Pang, and D. Ralph, Mathematical programs with equilibrium constraints . Cambridge University Press, 2008
2008
Earlier work this paper cites.
R. Goebel, R. G. Sanfelice, and A. R. Teel, “Hybrid dynamical systems,” IEEE Control Systems Magazine , vol. 29, no. 2, pp. 28–93, 2009
2009
Earlier work this paper cites.
N. Ratliff, M. Zucker, J. A. Bagnell, and S. Srinivasa, “Chomp: Gradient optimization techniques for efficient motion planning,” in 2009 IEEE International Conference on Robotics and Automation , 2009, pp. 489–494
2009
Earlier work this paper cites.
L. P. Kaelbling and T. Lozano-Pérez, “Hierarchical task and motion planning in the now,” in 2011 IEEE International Conference on Robotics and Automation , 2011, pp. 1470–1477
2011
Earlier work this paper cites.
K. Yunt, “An augmented lagrangian based shooting method for the optimal trajectory generation of switching lagrangian systems,” Dynamics of Continuous, Discrete and Impulsive Systems Series B: Applications and Algorithms , vol. 18, no. 5, pp. 615–645, 2011
2011
Cited alongside, same era.
M. Kalakrishnan, S. Chitta, E. Theodorou, P. Pastor, and S. Schaal, “Stomp: Stochastic trajectory optimization for motion planning,” in 2011 IEEE International Conference on Robotics and Automation , 2011, pp. 4569–4574
2011
Cited alongside, same era.
E. Todorov, T. Erez, and Y. Tassa, “Mujoco: A physics engine for model-based control,” in 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems , 2012, pp. 5026–5033
2012
Cited alongside, same era.
D. Navarro-Alarcón, Y. Liu, J. G. Romero, and P. Li, “Model-free visually servoed deformation control of elastic objects by robot manipulators,” IEEE Transactions on Robotics , vol. 29, no. 6, pp. 1457–1468, 2013
2013
M. T. Mason, “Toward robotic manipulation,” Annual Review of Control, Robotics, and Autonomous Systems , vol. 1, pp. 1–28, 2018
2018
Later among the works it cites.
T. Tang, C. Wang, and M. Tomizuka, “A framework for manipulating deformable linear objects by coherent point drift,” IEEE Robotics and Automation Letters , vol. 3, no. 4, pp. 3426–3433, 2018
2018
Later among the works it cites.
J. Zhu, B. Navarro, P. Fraisse, A. Crosnier, and A. Cherubini, “Dual-arm robotic manipulation of flexible cables,” in 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , 2018, pp. 479–484
2018
Later among the works it cites.
F. von Drigalski, C. Schlette, M. Rudorfer, N. Correll, J. Triyonoputro, W. Wan, T. Tsuji, and T. Watanabe, “Robots assembling machines: Learning from the world robot summit 2018 assembly challenge,” 2019
2019
Later among the works it cites.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
Cited alongside, same era.
I. G. Ramirez-Alpizar, K. Harada, and E. Yoshida, “Motion planning for dual-arm assembly of ring-shaped elastic objects,” in 2014 IEEE-RAS International Conference on Humanoid Robots , 2014, pp. 594–600
2014
Cited alongside, same era.
M. Posa, C. Cantu, and R. Tedrake, “A direct method for trajectory optimization of rigid bodies through contact,” The International Journal of Robotics Research , vol. 33, no. 1, pp. 69–81, 2014
2014
Cited alongside, same era.
J. Schulman, Y. Duan, J. Ho, A. Lee, I. Awwal, H. Bradlow, J. Pan, S. Patil, K. Goldberg, and P. Abbeel, “Motion planning with sequential convex optimization and convex collision checking,” The International Journal of Robotics Research , vol. 33, no. 9, pp. 1251–1270, 2014
2014
Cited alongside, same era.
Y. LeCun, Y. Bengio, and G. Hinton, “Deep learning,” nature , vol. 521, no. 7553, pp. 436–444, 2015
2015
Cited alongside, same era.
A. Krizhevsky, I. Sutskever, and G. E. Hinton, “Imagenet classification with deep convolutional neural networks,” Communications of the ACM , vol. 60, no. 6, pp. 84–90, 2017
2017
Cited alongside, same era.
D. Silver, J. Schrittwieser, K. Simonyan, I. Antonoglou, A. Huang, A. Guez, T. Hubert, L. Baker, M. Lai, A. Bolton et al. , “Mastering the game of go without human knowledge,” nature , vol. 550, no. 7676, pp. 354–359, 2017
2017
Cited alongside, same era.
A. Nair, D. Chen, P. Agrawal, P. Isola, P. Abbeel, J. Malik, and S. Levine, “Combining self-supervised learning and imitation for vision-based rope manipulation,” 03 2017
2017
Cited alongside, same era.
P. Foehn, D. Falanga, N. Kuppuswamy, R. Tedrake, and D. Scaramuzza, “Fast trajectory optimization for agile quadrotor maneuvers with a cable-suspended payload.” RSS , 2017
2017
Cited alongside, same era.
S. Jin, C. Wang, and M. Tomizuka, “Robust deformation model approximation for robotic cable manipulation,” in 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , 2019, pp. 6586–6593
2019
Later among the works it cites.
L. Manuelli, W. Gao, P. R. Florence, and R. Tedrake, “kpam: Keypoint affordances for category-level robotic manipulation,” 2019
2019
Later among the works it cites.
J. Zhu, B. Navarro, R. Passama, P. Fraisse, A. Crosnier, and A. Cherubini, “Robotic manipulation planning for shaping deformable linear objects with environmental contacts,” IEEE Robotics and Automation Letters , vol. 5, no. 1, pp. 16–23, 2020
2020
Later among the works it cites.
K. Tatemura and H. Dobashi, “Strategy for roller chain assembly with parallel jaw gripper,” IEEE Robotics and Automation Letters , vol. 5, no. 2, pp. 2435–2442, 2020
2020
Later among the works it cites.
S. Jin, C. Wang, X. Zhu, T. Tang, and M. Tomizuka, “Real-time state estimation of deformable objects with dynamical simulation,” in Workshop on Robotic Manipulation of Deformable Objects 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , 2020
2020
Later among the works it cites.
P. Kolaric, D. Jha, A. Raghunathan, F. Lewis, M. Benosman, D. Romeres, and D. Nikovski, “Local policy optimization for trajectory-centric reinforcement learning,” in IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2020, pp. 5094–5100
2020
Later among the works it cites.