Fetching the paper…
Reading the bibliography…
We propose a performance-based autotuning method for cascade control systems, where the parameters of a linear axis drive motion controller from two control loops are tuned jointly.
J. Ziegler and N. Nichols, “Optimum settings for automatic controllers,” Transactions of the ASME , vol. 64, pp. 759–768, 1942
1942
Earlier work this paper cites.
C. Kessler, “Das symmetrische Optimum,” Regelungstechnik , vol. 6, pp. 395 – 400, 432 – 436, 1958
1958
Earlier work this paper cites.
K. J. Åström, T. Hägglund, C. C. Hang, and W. K. Ho, “Automatic tuning and adaptation for PID controllers–a survey,” Control Engineering Practice , vol. 1, no. 4, pp. 699–714, 1993
1993
Earlier work this paper cites.
S. Preitl and R.-E. Precup, “An extension of tuning relations after symmetrical optimum method for PI and PID controllers,” Automatica , vol. 35, no. 10, pp. 1731 – 1736, 1999
1999
Earlier work this paper cites.
W. G. da Silva, P. P. Acarnley, and J. W. Finch, “Application of genetic algorithms to the online tuning of electric drive speed controllers,” IEEE Transactions on Industrial Electronics , vol. 47, no. 1, pp. 217–219, 2000
2000
Earlier work this paper cites.
C. Hang, K. Åström, and Q. Wang, “Relay feedback auto-tuning of process controllers–a tutorial review,” Journal of process control , vol. 12, no. 1, pp. 143–162, 2002
2002
Earlier work this paper cites.
M. Campi, A. Lecchini, and S. Savaresi, “Virtual reference feedback tuning: a direct method for the design of feedback controllers,” Automatica , vol. 38, no. 8, pp. 1337 – 1346, 2002
2002
Earlier work this paper cites.
K. K. Varanasi and S. A. Nayfeh, “The dynamics of lead-screw drives: Low-order modeling and experiments,” Journal of Dynamic Systems, Measurement, and Control, ASME , vol. 126, pp. 388 – 398, Jun. 2004
2004
Earlier work this paper cites.
H. Prochazka, M. Gevers, B. D. O. Anderson, and C. Ferrera, “Iterative feedback tuning for robust controller design and optimization,” in Conference on Decision and Control , pp. 3602–3607, 2005
2005
Earlier work this paper cites.
M. C. Campi and S. M. Savaresi, “Direct nonlinear control design: the virtual reference feedback tuning (VRFT) approach,” IEEE Transactions on Automatic Control , vol. 51, no. 1, pp. 14–27, 2006
2006
Earlier work this paper cites.
C. E. Rasmussen and C. K. I. Williams, Gaussian Processes for Machine Learning . MIT Press, 2006
2006
Earlier work this paper cites.
K. J. Aström and R. M. Murray, Feedback Systems: An Introduction for Scientists and Engineers . USA: Princeton University Press, 2008
2008
Cited alongside, same era.
Y. Altintas, A. Verl, C. Brecher, L. Uriarte, and G. Pritschow, “Machine tool feed drives,” CIRP annals , vol. 60, no. 2, pp. 779–796, 2011
2011
Cited alongside, same era.
N. Srinivas, A. Krause, S. M. Kakade, and M. W. Seeger, “Information-theoretic regret bounds for Gaussian process optimization in the bandit setting,” IEEE Transactions on Information Theory , vol. 58, no. 5, pp. 3250–3265, 2012
2012
Cited alongside, same era.
M. Rădac, R. Precup, E. M. Petriu, and S. Preitl, “Iterative data-driven tuning of controllers for nonlinear systems with constraints,” IEEE Transactions on Industrial Electronics , vol. 61, DOI 10.1109/TIE.2014.2300068 , no. 11, pp. 6360–6368, Nov. 2014
2014
Cited alongside, same era.
A. Karimi and C. Kammer, “A data-driven approach to robust control of multivariable systems by convex optimization,” Automatica , vol. 85, pp. 227 – 233, 2017
2017
Later among the works it cites.
S. Bansal, R. Calandra, T. Xiao, S. Levine, and C. J. Tomiin, “Goal-driven dynamics learning via Bayesian optimization,” in Conference on Decision and Control , pp. 5168–5173, 2017
2017
Later among the works it cites.
C. Novara and S. Formentin, “Data-driven inversion-based control of nonlinear systems with guaranteed closed-loop stability,” IEEE Transactions on Automatic Control , vol. 63, no. 4, pp. 1147–1154, 2018
2018
Later among the works it cites.
M. Neumann-Brosig, A. Marco, D. Schwarzmann, and S. Trimpe, “Data-efficient auto-tuning with Bayesian optimization: An industrial control study,” IEEE Transactions on Control Systems Technology , 2018
2018
Later among the works it cites.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
A. S. Bazanella, L. Campestrini, and D. Eckhard, Data-Driven Controller Design: The H 2 H_{2} Approach . Springer Publishing Company, Incorporated, 2014
2014
Cited alongside, same era.
R. Kumar, S. Singla, and V. Chopra, “Comparison among some well known control schemes with different tuning methods,” Journal of Applied Research and Technology , vol. 13, no. 3, pp. 409 – 415, 2015
2015
Cited alongside, same era.
S. Formentin, D. Piga, R. Toth, and S. M. Savaresi, “Direct learning of LPV controllers from data,” Automatica , vol. 65, pp. 98 – 110, 2016
2016
Cited alongside, same era.
O. Andersson, M. Wzorek, P. Rudol, and P. Doherty, “Model-predictive control with stochastic collision avoidance using Bayesian policy optimization,” in 2016 IEEE International Conference on Robotics and Automation (ICRA) , DOI 10.1109/ICRA.2016.7487661 , pp. 4597–4604, May. 2016
2016
Cited alongside, same era.
F. Berkenkamp, A. P. Schoellig, and A. Krause, “Safe controller optimization for quadrotors with Gaussian processes,” 2016 IEEE International Conference on Robotics and Automation , pp. 491 – 496, 2016
2016
Cited alongside, same era.
2016
Cited alongside, same era.
R. Qian, M. Luo, J. Zhao, and T. Li, “Novel sliding mode control for ball screw servo system,” in MATEC Web of conferences,7th International Conference on Mechanical, Industrial, and Manufacturing Technologies , ser. 03007, vol. 54, 2016
2016
Cited alongside, same era.
M. Maier, R. Zwicker, M. Akbari, A. Rupenyan, and K. Wegener, “Bayesian optimization for autonomous process set-up in turning,” CIRP Journal of Manufacturing Science and Technology , vol. 26, DOI https://doi.org/10.1016/j.cirpj.2019.04.005 , pp. 81 – 87, 2019
2019
Later among the works it cites.
M. Khosravi, A. Eichler, N. Schmid, P. Heer, and R. S. Smith, “Controller tuning by Bayesian optimization an application to a heat pump,” in European Control Conference , pp. 1467–1472. IEEE, 2019
2019
Later among the works it cites.
M. Khosravi, N. Schmid, A. Eichler, P. Heer, and R. S. Smith, “Machine learning-based modeling and controller tuning of a heat pump,” in Journal of Physics: Conference Series , vol. 1343, no. 1, p. 012065. IOP Publishing, 2019
2019
Later among the works it cites.
Z. Qi, Q. Shi, and H. Zhang, “Tuning of digital PID controllers using particle swarm optimization algorithm for a CAN-based DC motor subject to stochastic delays,” IEEE Transactions on Industrial Electronics , vol. 67, no. 7, pp. 5637–5646, 2020
2020
Closest in time.
M. Maier, A. Rupenyan, C. Bobst, and K. Wegener, “Self-optimizing grinding machines using gaussian process models and constrained bayesian optimization,” The International Journal of Advanced Manufacturing Technology , vol. 108, pp. 528–552, 2020, DOI: https://doi.org/10.1007/s00170-020-05369-9
2020
Closest in time.
C. Koenig, M. Khosravi, R. S. Smith, A. Rupenyan, and J. Lygeros, “Safety-aware cascade controller tuning using constrained Bayesian optimization,” Master thesis, ETH Zurich , 2020
2020
Closest in time.