Fetching the paper…
Reading the bibliography…
A majority of microrobots are constructed using compliant materials that are difficult to model analytically, limiting the utility of traditional model-based controllers.
1901
Earlier work this paper cites.
D. A. Pomerleau, “Alvinn: An autonomous land vehicle in a neural network,” in Advances in neural information processing systems , 1989, pp. 305–313
1989
Earlier work this paper cites.
S. A. Bailey, J. G. Cham, M. R. Cutkosky, and R. J. Full, “Comparing the locomotion dynamics of the cockroach and a shape deposition manufactured biomimetic hexapod,” in Experimental Robotics VII . Berlin, Heidelberg: Springer Berlin Heidelberg, 2001, pp. 239–248. [Online]. Available: https://link.springer.com/chapter/10.1007/3-540-45118-8_25
2001
Earlier work this paper cites.
L. L. Howell, Compliant mechanisms . John Wiley & Sons, 2001
2001
Earlier work this paper cites.
A. M. Hoover and R. S. Fearing, “Fast scale prototyping for folded millirobots,” in 2008 IEEE International Conference on Robotics and Automation . IEEE, 2008, pp. 886–892
2008
Earlier work this paper cites.
B. Finio, N. Perez-Arancibia, and R. Wood, “System identification and linear time-invariant modeling of an insect-sized flapping-wing micro air vehicle,” 09 2011, pp. 1107–1114
2011
Earlier work this paper cites.
K. L. Hoffman and R. J. Wood, “Passive undulatory gaits enhance walking in a myriapod millirobot,” in Intelligent Robots and Systems (IROS), 2011 IEEE/RSJ International Conference on . IEEE, 2011, pp. 1479–1486
2011
Earlier work this paper cites.
A. T. Baisch and R. J. Wood, “Design and fabrication of the harvard ambulatory micro-robot,” in Robotics Research . Springer, 2011, pp. 715–730
2011
Earlier work this paper cites.
P. S. Sreetharan, J. P. Whitney, M. D. Strauss, and R. J. Wood, “Monolithic fabrication of millimeter-scale machines,” Journal of Micromechanics and Microengineering , vol. 22, no. 5, p. 055027, 2012
2012
Earlier work this paper cites.
L. U. Odhner and A. M. Dollar, “The smooth curvature model: An efficient representation of euler–bernoulli flexures as robot joints,” IEEE Transactions on Robotics , vol. 28, no. 4, pp. 761–772, 2012
2012
Earlier work this paper cites.
L. L. Howell, “Compliant mechanisms,” in 21st Century Kinematics . Springer, 2013, pp. 189–216
2013
Earlier work this paper cites.
M. Posa, C. Cantu, and R. Tedrake, “A direct method for trajectory optimization of rigid bodies through contact,” The International Journal of Robotics Research , vol. 33, no. 1, pp. 69–81, 2014
2014
Earlier work this paper cites.
2014
Earlier work this paper cites.
V. Mnih, K. Kavukcuoglu, D. Silver, A. A. Rusu, J. Veness, M. G. Bellemare, A. Graves, M. Riedmiller, A. K. Fidjeland, G. Ostrovski, S. Petersen, C. Beattie, A. Sadik, I. Antonoglou, H. King, D. Kumaran, D. Wierstra, S. Legg, and D. Hassabis, “Human-level control through deep reinforcement learning,” Nature , vol. 518, no. 7540, pp. 529–533, Feb. 2015
2015
Earlier work this paper cites.
S. Kolev and E. Todorov, “Physically consistent state estimation and system identification for contacts,” in 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids) . IEEE, 2015, pp. 1036–1043
2015
Earlier work this paper cites.
N. T. Jafferis, M. J. Smith, and R. J. Wood, “Design and manufacturing rules for maximizing the performance of polycrystalline piezoelectric bending actuators,” Smart Materials and Structures , vol. 24, no. 6, p. 065023, 2015. [Online]. Available: http://stacks.iop.org/0964-1726/24/i=6/a=065023
2015
Earlier work this paper cites.
N. Doshi, B. Goldberg, R. Sahai, N. Jafferis, D. Aukes, R. J. Wood, and J. A. Paulson, “Model driven design for flexure-based microrobots,” in 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) , Sept 2015, pp. 4119–4126. [Online]. Available: http://ieeexplore.ieee.org/abstract/document/7353959/
2015
Earlier work this paper cites.
D. Silver, A. Huang, C. J. Maddison, A. Guez, L. Sifre, G. van den Driessche, J. Schrittwieser, I. Antonoglou, V. Panneershelvam, M. Lanctot, S. Dieleman, D. Grewe, J. Nham, N. Kalchbrenner, I. Sutskever, T. Lillicrap, M. Leach, K. Kavukcuoglu, T. Graepel, and D. Hassabis, “Mastering the game of Go with deep neural networks and tree search,” Nature , vol. 529, no. 7587, pp. 484–489, Jan. 2016
2016
Cited alongside, same era.
2016
Cited alongside, same era.
2016
Cited alongside, same era.
2018
Later among the works it cites.
X. B. Peng, M. Andrychowicz, W. Zaremba, and P. Abbeel, “Sim-to-real transfer of robotic control with dynamics randomization,” in 2018 IEEE international conference on robotics and automation (ICRA) . IEEE, 2018, pp. 1–8
2018
Later among the works it cites.
T. Chen, A. Murali, and A. Gupta, “Hardware conditioned policies for multi-robot transfer learning,” in Advances in Neural Information Processing Systems , 2018, pp. 9355–9366
2018
Later among the works it cites.
2018
Later among the works it cites.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
2016
Cited alongside, same era.
B. Goldberg, N. Doshi, and R. J. Wood, “High speed trajectory control using an experimental maneuverability model for an insect-scale legged robot,” in 2017 IEEE International Conference on Robotics and Automation (ICRA) , 2017, pp. 3538–3545
2017
Cited alongside, same era.
2017
Cited alongside, same era.
J. Tobin, R. Fong, A. Ray, J. Schneider, W. Zaremba, and P. Abbeel, “Domain randomization for transferring deep neural networks from simulation to the real world,” in 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) . IEEE, 2017, pp. 23–30
2017
Cited alongside, same era.
2017
Cited alongside, same era.
2017
Cited alongside, same era.
2017
Cited alongside, same era.
J. P. Hanna and P. Stone, “Grounded action transformation for robot learning in simulation.” in AAAI , 2017, pp. 3834–3840
2017
Cited alongside, same era.
2017
Cited alongside, same era.
F. Golemo, A. A. Taiga, A. Courville, and P.-Y. Oudeyer, “Sim-to-real transfer with neural-augmented robot simulation,” in Conference on Robot Learning , 2018, pp. 817–828
2018
Later among the works it cites.
K. Bousmalis, A. Irpan, P. Wohlhart, Y. Bai, M. Kelcey, M. Kalakrishnan, L. Downs, J. Ibarz, P. Pastor, K. Konolige et al. , “Using simulation and domain adaptation to improve efficiency of deep robotic grasping,” in 2018 IEEE international conference on robotics and automation (ICRA) . IEEE, 2018, pp. 4243–4250
2018
Later among the works it cites.
2018
Later among the works it cites.
2019
Later among the works it cites.
J. Carius, R. Ranftl, V. Koltun, and M. Hutter, “Trajectory optimization for legged robots with slipping motions,” IEEE Robotics and Automation Letters , vol. 4, no. 3, pp. 3013–3020, 2019
2019
Later among the works it cites.
Y. Chebotar, A. Handa, V. Makoviychuk, M. Macklin, J. Issac, N. Ratliff, and D. Fox, “Closing the sim-to-real loop: Adapting simulation randomization with real world experience,” in 2019 International Conference on Robotics and Automation (ICRA) . IEEE, 2019, pp. 8973–8979
2019
Later among the works it cites.
J. Hwangbo, J. Lee, A. Dosovitskiy, D. Bellicoso, V. Tsounis, V. Koltun, and M. Hutter, “Learning agile and dynamic motor skills for legged robots,” Science Robotics , vol. 4, no. 26, 2019
2019
Later among the works it cites.
A. Ajay, M. Bauza, J. Wu, N. Fazeli, J. B. Tenenbaum, A. Rodriguez, and L. P. Kaelbling, “Combining physical simulators and object-based networks for control,” in 2019 International Conference on Robotics and Automation (ICRA) . IEEE, 2019, pp. 3217–3223
2019
Later among the works it cites.
T. Johannink, S. Bahl, A. Nair, J. Luo, A. Kumar, M. Loskyll, J. A. Ojea, E. Solowjow, and S. Levine, “Residual reinforcement learning for robot control,” in 2019 International Conference on Robotics and Automation (ICRA) . IEEE, 2019, pp. 6023–6029
2019
Later among the works it cites.
V. S. Medeiros, E. Jelavic, M. Bjelonic, R. Siegwart, M. A. Meggiolaro, and M. Hutter, “Trajectory optimization for wheeled-legged quadrupedal robots driving in challenging terrain,” IEEE Robotics and Automation Letters , vol. 5, no. 3, pp. 4172–4179, 2020
2020
Later among the works it cites.
2020
Later among the works it cites.
N. Fazeli, A. Ajay, and A. Rodriguez, “Long-horizon prediction and uncertainty propagation with residual point contact learners,” in 2020 IEEE International Conference on Robotics and Automation (ICRA) . IEEE, 2020, pp. 7898–7904
2020
Later among the works it cites.
A. Zeng, S. Song, J. Lee, A. Rodriguez, and T. Funkhouser, “Tossingbot: Learning to throw arbitrary objects with residual physics,” IEEE Transactions on Robotics , 2020
2020
Later among the works it cites.