Fetching the paper…
Reading the bibliography…
In this paper, we present INertial Lidar Localisation Autocalibration And MApping (IN2LAAMA): an offline probabilistic framework for localisation, mapping, and extrinsic calibration based on a 3D-lidar and a 6-DoF-IMU.
J. L. Bentley, “Multidimensional binary search trees used for associative searching,” Communications of the ACM , vol. 18, no. 9, pp. 509–517, sep 1975
1975
Earlier work this paper cites.
P. J. Besl and N. D. McKay, “A Method for Registration of 3-D Shapes,” IEEE Transactions on Pattern Analysis and Machine Intelligence , 1992
1992
Earlier work this paper cites.
H. F. Durrant-Whyte, “An autonomous guided vehicle for cargo handling applications,” International Journal of Robotics Research , vol. 15, no. 5, pp. 407–440, 1996
1996
Earlier work this paper cites.
M. Bosse, P. Newman, J. Leonard, M. Soika, W. Feiten, and S. Teller, “An Atlas framework for scalable mapping,” Proceedings - IEEE International Conference on Robotics and Automation , vol. 2, pp. 1899–1906, 2003
2003
Earlier work this paper cites.
C. E. Rasmussen and C. K. I. Williams, Gaussian Processes for Machine Learning . The MIT Press, 2006
2006
Earlier work this paper cites.
A. Segal, D. Haehnel, and S. Thrun, “Generalized-ICP,” Robotics: Science and Systems , vol. 5, pp. 168–176, 2009
2009
Earlier work this paper cites.
M. Bosse and R. Zlot, “Continuous 3D Scan-Matching with a Spinning 2D Laser,” IEEE International Conference on Robotics and Automation , 2009
2009
Earlier work this paper cites.
S. Hong, H. Ko, and J. Kim, “VICP: Velocity updating iterative closest point algorithm,” Proceedings - IEEE International Conference on Robotics and Automation , no. Section 3, pp. 1893–1898, 2010
2010
Earlier work this paper cites.
A. Kassir and T. Peynot, “Reliable Automatic Camera-Laser Calibration,” Australasian Conference on Robotics and Automation , 2010
2010
Earlier work this paper cites.
T. Lupton and S. Sukkarieh, “Visual-inertial-aided navigation for high-dynamic motion in built environments without initial conditions,” IEEE Transactions on Robotics , vol. 28, no. 1, pp. 61–76, 2012
2012
Earlier work this paper cites.
P. Furgale, T. D. Barfoot, and G. Sibley, “Continuous-Time Batch Estimation using Temporal Basis Functions,” IEEE International Conference on Robotics and Automation , pp. 2088–2095, 2012
2012
Earlier work this paper cites.
M. Bosse, R. Zlot, and P. Flick, “Zebedee : Design of a spring-mounted 3-D range sensor with application to mobile mapping,” IEEE Transactions on Robotics , vol. 28, no. October, pp. 1–15, 2012
2012
Earlier work this paper cites.
A. Geiger, P. Lenz, and R. Urtasun, “Are we ready for autonomous driving? the KITTI vision benchmark suite,” Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition , pp. 3354–3361, 2012
2012
Cited alongside, same era.
P. Furgale, J. Rehder, and R. Siegwart, “Unified temporal and spatial calibration for multi-sensor systems,” IEEE International Conference on Intelligent Robots and Systems , pp. 1280–1286, 2013
2013
Cited alongside, same era.
V. M. Tereshkov, “An Intuitive Approach to Inertial Sensor Bias Estimation,” International Journal of Navigation and Observation , vol. 2013, pp. 1–6, 2013
2013
Cited alongside, same era.
J. Zhang and S. Singh, “LOAM : Lidar odometry and mapping in real-time,” Robotics: Science and Systems , pp. 7–15, 2014
2014
Cited alongside, same era.
J. Castorena, U. S. Kamilov, and P. T. Boufounos, “Autocalibration of LIDAR and optical cameras via edge alignement,” IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) , pp. 2862–2866, 2016
2016
Later among the works it cites.
Z. Yu and J. L. Crassidis, “Accelerometer Bias Calibration Using Attitude and Angular Velocity Information,” Journal of Guidance, Control, and Dynamics , vol. 39, no. 4, pp. 741–753, 2016
2016
Later among the works it cites.
S. Du, W. Sun, and Y. Gao, “Improving observability of an inertial system by rotary motions of an IMU,” Sensors (Switzerland) , vol. 17, no. 4, pp. 1–20, 2017
2017
Later among the works it cites.
C. Le Gentil, T. Vidal-Calleja, and S. Huang, “3D Lidar-IMU Calibration based on Upsampled Preintegrated Measurements for Motion Distortion Correction,” IEEE International Conference on Robotics and Automation , 2018
2018
Later among the works it cites.
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
Z. Taylor and J. Nieto, “Parameterless automatic extrinsic calibration of vehicle mounted lidar-camera systems,” International Conference on Robotics and Automation: Long Term Autonomy Workshop , no. October, pp. 3–6, 2014
2014
Cited alongside, same era.
C. Forster, L. Carlone, F. Dellaert, and D. Scaramuzza, “IMU preintegration on manifold for efficient visual-inertial maximum-a-posteriori estimation,” Robotics: Science and Systems , pp. 6–15, 2015
2015
Cited alongside, same era.
S. Anderson and T. D. Barfoot, “Full STEAM ahead: Exactly sparse Gaussian process regression for batch continuous-time trajectory estimation on SE(3),” IEEE International Conference on Intelligent Robots and Systems , vol. 2015-Dec, no. 3, pp. 157–164, 2015
2015
Cited alongside, same era.
V. M. Tereshkov, “A Simple Observer for Gyro and Accelerometer Biases in Land Navigation Systems,” Journal of Navigation , vol. 68, no. 04, pp. 635–645, 2015
2015
Cited alongside, same era.
Z. Yang and S. Shen, “Monocular visual-inertial state estimation with online initialization and camera-IMU extrinsic calibration,” IEEE Transactions on Automation Science and Engineering , vol. 14, no. 1, pp. 39–51, 2017
2015
Cited alongside, same era.
E. Mendes, P. Koch, and S. Lacroix, “ICP-based pose-graph SLAM,” IEEE International Symposium on Safety, Security and Rescue Robotics , pp. 195–200, 2016
2016
Cited alongside, same era.
J. Serafin, E. Olson, and G. Grisetti, “Fast and robust 3D feature extraction from sparse point clouds,” IEEE International Conference on Intelligent Robots and Systems , vol. 2016-Nov, pp. 4105–4112, 2016
2016
Cited alongside, same era.
D. Droeschel and S. Behnke, “Efficient Continuous-time SLAM for 3D Lidar-based Online Mapping,” IEEE International Conference on Robotics and Automation (ICRA) , no. May, pp. 5000–5007, 2018
2018
Later among the works it cites.
C. Park, P. Moghadam, S. Kim, A. Elfes, C. Fookes, and S. Sridharan, “Elastic LiDAR Fusion: Dense Map-Centric Continuous-Time SLAM,” IEEE International Conference on Robotics and Automation , 2018
2018
Later among the works it cites.
P. Geneva and K. Eckenhoff, “LIPS: LiDAR-Inertial 3D Plane SLAM,” IEEE International Conference on Intelligent Robots and Systems , 2018
2018
Later among the works it cites.
J.-E. Deschaud, “IMLS-SLAM: scan-to-model matching based on 3D data,” IEEE International Conference on Robotics and Automation (ICRA) , pp. 2480–2485, 2018
2018
Later among the works it cites.
F. Neuhaus, T. Koß, R. Kohnen, and D. Paulus, “MC2SLAM: Real-Time Inertial Lidar Odometry Using Two-Scan Motion Compensation,” German Conference on Pattern Recognition , 2018
2018
Later among the works it cites.
C. Le Gentil, T. Vidal-Calleja, and S. Huang, “IN2LAMA : INertial Lidar Localisation And MApping,” IEEE International Conference on Robotics and Automation , 2019
2019
Closest in time.
Y. Yang, P. Geneva, K. Eckenhoff, and G. Huang, “Degenerate Motion Analysis for Aided INS with Online Spatial and Temporal Sensor Calibration,” IEEE Robotics and Automation Letters , vol. 4, no. 2, pp. 2070–2077, 2019
2019
Closest in time.