Fetching the paper…
Reading the bibliography…
This paper provides an overview of 3D scanning methodologies and technologies proposed in the existing scientific and industrial literature.
R. A. Toupin, “Saint-venant’s principle,” Archive for Rational Mechanics and Analysis , vol. 18, no. 2, pp. 83–96, 1965
1965
Earlier work this paper cites.
H. Takasaki, “Moiré topography,” Applied optics , vol. 9, no. 6, pp. 1467–1472, 1970
1970
Earlier work this paper cites.
D. Meagher, “Geometric modeling using octree encoding,” Computer graphics and image processing , vol. 19, no. 2, pp. 129–147, 1982
1982
Earlier work this paper cites.
J. Schmidt and L. Eisele, “Stroboscopic illumination and dark rearing block the sharpening of the regenerated retinotectal map in goldfish,” Neuroscience , vol. 14, no. 2, pp. 535–546, 1985
1985
Earlier work this paper cites.
O. J. Løkberg, “Electronic speckle pattern interferometry,” in Optical Metrology . Springer, 1987, pp. 542–572
1987
Earlier work this paper cites.
D. J. Bone, “Fourier fringe analysis: the two-dimensional phase unwrapping problem,” Applied optics , vol. 30, no. 25, pp. 3627–3632, 1991
1991
Earlier work this paper cites.
J. B. Thorne and D. R. Bobbitt, “Comparison of beer’s law and thermal lens techniques for absorption measurements under conditions of high scattering backgrounds,” Applied spectroscopy , vol. 47, no. 3, pp. 360–365, 1993
1993
Earlier work this paper cites.
D. Koller, P. Lindstrom, W. Ribarsky, L. F. Hodges, N. Faust, and G. Turner, “Virtual gis: A real-time 3d geographic information system,” in Proceedings of the 6th conference on Visualization’95 . IEEE Computer Society, 1995, p. 94
1995
Earlier work this paper cites.
T. Toutin and M. Beaudoin, “Real-time extraction of planimetric and altimetric features from digital stereo spot data using a digital video plotter,” Photogrammetric engineering and remote sensing , vol. 61, no. 1, pp. 63–68, 1995
1995
Earlier work this paper cites.
M. Shahinpoor, Y. Bar-Cohen, J. Simpson, and J. Smith, “Ionic polymer-metal composites (ipmcs) as biomimetic sensors, actuators and artificial muscles-a review,” Smart materials and structures , vol. 7, no. 6, p. R15, 1998
1998
Earlier work this paper cites.
M. Kerschner, “Homologous twin snakes integrated in a bundle block adjustment,” International Archives of Photogrammetry and Remote Sensing , vol. 32, pp. 244–249, 1998
1998
Earlier work this paper cites.
F. Bernardini, J. Mittleman, H. Rushmeier, C. Silva, and G. Taubin, “The ball-pivoting algorithm for surface reconstruction,” IEEE transactions on visualization and computer graphics , vol. 5, no. 4, pp. 349–359, 1999
1999
Earlier work this paper cites.
B. Triggs, P. F. McLauchlan, R. I. Hartley, and A. W. Fitzgibbon, “Bundle adjustment-a modern synthesis,” in International workshop on vision algorithms . Springer, 1999, pp. 298–372
1999
Earlier work this paper cites.
K. Petras, “On the computation of the gauss–legendre quadrature formula with a given precision,” Journal of computational and applied mathematics , vol. 112, no. 1, pp. 253–267, 1999
1999
Earlier work this paper cites.
E. P. Baltsavias, “A comparison between photogrammetry and laser scanning,” ISPRS Journal of photogrammetry and Remote Sensing , vol. 54, no. 2, pp. 83–94, 1999
1999
Earlier work this paper cites.
C.-P. Lu, G. D. Hager, and E. Mjolsness, “Fast and globally convergent pose estimation from video images,” IEEE Transactions on Pattern Analysis and Machine Intelligence , vol. 22, no. 6, pp. 610–622, 2000
2000
Earlier work this paper cites.
M. Levoy, K. Pulli, B. Curless, S. Rusinkiewicz, D. Koller, L. Pereira, M. Ginzton, S. Anderson, J. Davis, J. Ginsberg et al. , “The digital michelangelo project: 3d scanning of large statues,” in Proceedings of the 27th annual conference on Computer graphics and interactive techniques . ACM Press/Addison-Wesley Publishing Co., 2000, pp. 131–144
2000
Earlier work this paper cites.
J. Shi and J. Malik, “Normalized cuts and image segmentation,” IEEE Transactions on pattern analysis and machine intelligence , vol. 22, no. 8, pp. 888–905, 2000
2000
Earlier work this paper cites.
T. B. Moeslund and E. Granum, “A survey of computer vision-based human motion capture,” Computer vision and image understanding , vol. 81, no. 3, pp. 231–268, 2001
2001
Earlier work this paper cites.
K. Tsukada, E. Sekizuka, C. Oshio, and H. Minamitani, “Direct measurement of erythrocyte deformability in diabetes mellitus with a transparent microchannel capillary model and high-speed video camera system,” Microvascular research , vol. 61, no. 3, pp. 231–239, 2001
2001
Earlier work this paper cites.
P. Calvert, “Inkjet printing for materials and devices,” Chemistry of materials , vol. 13, no. 10, pp. 3299–3305, 2001
2001
Earlier work this paper cites.
Y. Tamura, M. Matsui, L.-C. Pagnini, R. Ishibashi, and A. Yoshida, “Measurement of wind-induced response of buildings using rtk-gps,” Journal of Wind Engineering and Industrial Aerodynamics , vol. 90, no. 12, pp. 1783–1793, 2002
2002
Earlier work this paper cites.
W. Boehler and A. Marbs, “3d scanning instruments,” Proceedings of the CIPA WG , vol. 6, pp. 9–18, 2002
2002
Earlier work this paper cites.
T. Schmidt, J. Tyson, and K. Galanulis, “Full-field dynamic displacement and strain measurement using advanced 3d image correlation photogrammetry: part 1,” Experimental Techniques , vol. 27, no. 3, pp. 47–50, 2003
2003
Earlier work this paper cites.
M. Herlihy, V. Luchangco, M. Moir, and W. N. Scherer III, “Software transactional memory for dynamic-sized data structures,” in Proceedings of the twenty-second annual symposium on Principles of distributed computing . ACM, 2003, pp. 92–101
2003
Earlier work this paper cites.
O. Wulf and B. Wagner, “Fast 3d scanning methods for laser measurement systems,” in International conference on control systems and computer science (CSCS14) , 2003, pp. 2–5
2003
Earlier work this paper cites.
Y. Kuzu, “Volumetric object reconstruction by means of photogrammetry,” Ph.D. dissertation, 2004
2004
Earlier work this paper cites.
G. Impoco, P. Cignoni, and R. Scopigno, “Closing gaps by clustering unseen directions,” in Shape Modeling Applications, 2004. Proceedings . IEEE, 2004, pp. 307–316
2004
Earlier work this paper cites.
F. Duguet, G. Drettakis, D. Girardeau-Montaut, J.-L. Martinez, and F. Schmitt, “A point-based approach for capture, display and illustration of very complex archeological artefacts,” in International Symposium on Virtual Reality, Archeology and Cultural Heritage (VAST2004) . Eurographics, 2004, pp. 105–114
2004
Earlier work this paper cites.
C. Fröhlich, M. Mettenleiter et al. , “Terrestrial laser scanning-new perspectives in 3d surveying,” International archives of photogrammetry, remote sensing and spatial information sciences , vol. 36, no. Part 8, p. W2, 2004
2004
Earlier work this paper cites.
S. Zlatanova, A. A. Rahman, and W. Shi, “Topological models and frameworks for 3d spatial objects,” Computers & Geosciences , vol. 30, no. 4, pp. 419–428, 2004
2004
Earlier work this paper cites.
Y. Li, J. Sun, C.-K. Tang, and H.-Y. Shum, “Lazy snapping,” in ACM Transactions on Graphics (ToG) , vol. 23, no. 3. ACM, 2004, pp. 303–308
2004
Earlier work this paper cites.
Y. Reshetyuk, “Calibration of terrestrial laser scanners callidus 1.1, leica hds 3000 and leica hds 2500,” Survey Review , vol. 38, no. 302, pp. 703–713, 2006
2006
Earlier work this paper cites.
V. Verma, R. Kumar, and S. Hsu, “3d building detection and modeling from aerial lidar data,” in Computer Vision and Pattern Recognition, 2006 IEEE Computer Society Conference on , vol. 2. IEEE, 2006, pp. 2213–2220
2006
Earlier work this paper cites.
T. Weise, B. Leibe, and L. Van Gool, “Fast 3d scanning with automatic motion compensation,” in Computer Vision and Pattern Recognition, 2007. CVPR’07. IEEE Conference on . IEEE, 2007, pp. 1–8
2007
Earlier work this paper cites.
T. Chen, H. P. Lensch, C. Fuchs, and H.-P. Seidel, “Polarization and phase-shifting for 3d scanning of translucent objects,” in Computer Vision and Pattern Recognition, 2007. CVPR’07. IEEE Conference on . IEEE, 2007, pp. 1–8
2007
Earlier work this paper cites.
K. Mechelke, T. P. Kersten, and M. Lindstaedt, “Comparative investigations into the accuracy behaviour of the new generation of terrestrial laser scanning systems,” Proc. in the Optical , vol. 3, pp. 19–327, 2007
2007
Earlier work this paper cites.
N. Yastikli, “Documentation of cultural heritage using digital photogrammetry and laser scanning,” Journal of Cultural Heritage , vol. 8, no. 4, pp. 423–427, 2007
2007
Earlier work this paper cites.
C. Croux, P. Filzmoser, and M. R. Oliveira, “Algorithms for projection–pursuit robust principal component analysis,” Chemometrics and Intelligent Laboratory Systems , vol. 87, no. 2, pp. 218–225, 2007
2007
Earlier work this paper cites.
S. El-Omari and O. Moselhi, “Integrating 3d laser scanning and photogrammetry for progress measurement of construction work,” Automation in construction , vol. 18, no. 1, pp. 1–9, 2008
2008
Earlier work this paper cites.
R. M. Wolk, “Utilizing google earth and google sketchup to visualize wind farms,” in Technology and Society, 2008. ISTAS 2008. IEEE International Symposium on . IEEE, 2008, pp. 1–8
2008
Earlier work this paper cites.
Q. Yu and Y. Shang, “Videometrics: principles and researches,” Science Process Bei-jing, China , pp. 71–71, 2009
2009
Earlier work this paper cites.
C. Reinhart and P.-F. Breton, “Experimental validation of autodesk® 3ds max® design 2009 and daysim 3.0,” Leukos , vol. 6, no. 1, pp. 7–35, 2009
2009
Earlier work this paper cites.
D. Schneider, “Calibration of a riegl lms-z420i based on a multi-station adjustment and a geometric model with additional parameters,” Int. Arch. Photogramm. Remote Sens. Spat. Inf , vol. 38, pp. 177–182, 2009
2009
Earlier work this paper cites.
S. Granshaw, “Close range photogrammetry: Principles, methods and applications,” The Photogrammetric Record , vol. 25, no. 130, pp. 203–204, 2010
2010
Earlier work this paper cites.
T. Gloe and R. Böhme, “The dresden image database for benchmarking digital image forensics,” Journal of Digital Forensic Practice , vol. 3, no. 2-4, pp. 150–159, 2010
2010
Earlier work this paper cites.
M. Hubert and M. Debruyne, “Minimum covariance determinant,” Wiley interdisciplinary reviews: Computational statistics , vol. 2, no. 1, pp. 36–43, 2010
2010
Earlier work this paper cites.
G. Verhoeven, “Taking computer vision aloft–archaeological three-dimensional reconstructions from aerial photographs with photoscan,” Archaeological Prospection , vol. 18, no. 1, pp. 67–73, 2011
2011
Earlier work this paper cites.
F. Remondino, L. Barazzetti, F. Nex, M. Scaioni, and D. Sarazzi, “Uav photogrammetry for mapping and 3d modeling–current status and future perspectives,” International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences , vol. 38, no. 1, p. C22, 2011
2011
Earlier work this paper cites.
F. Remondino, “Heritage recording and 3d modeling with photogrammetry and 3d scanning,” Remote Sensing , vol. 3, no. 6, pp. 1104–1138, 2011
2011
Earlier work this paper cites.
K. Oguma, “High-speed video camera,” Aug. 30 2011, uS Patent App. 13/221,282
2011
Earlier work this paper cites.
I. Chadès, T. G. Martin, S. Nicol, M. A. Burgman, H. P. Possingham, and Y. M. Buckley, “General rules for managing and surveying networks of pests, diseases, and endangered species,” Proceedings of the National Academy of Sciences , vol. 108, no. 20, pp. 8323–8328, 2011
2011
Earlier work this paper cites.
J. Tong, J. Zhou, L. Liu, Z. Pan, and H. Yan, “Scanning 3d full human bodies using kinects,” IEEE transactions on visualization and computer graphics , vol. 18, no. 4, pp. 643–650, 2012
2012
Earlier work this paper cites.
I. A. Anderson, T. A. Gisby, T. G. McKay, B. M. O’Brien, and E. P. Calius, “Multi-functional dielectric elastomer artificial muscles for soft and smart machines,” Journal of Applied Physics , vol. 112, no. 4, p. 041101, 2012
2012
Earlier work this paper cites.
M. L. Brutto and P. Meli, “Computer vision tools for 3d modelling in archaeology,” International Journal of Heritage in the Digital Era , vol. 1, no. 1_suppl, pp. 1–6, 2012
2012
Earlier work this paper cites.
M. Westoby, J. Brasington, N. Glasser, M. Hambrey, and J. Reynolds, “’structure-from-motion’photogrammetry: A low-cost, effective tool for geoscience applications,” Geomorphology , vol. 179, pp. 300–314, 2012
2012
Earlier work this paper cites.
W. Li, T. Grossman, and G. Fitzmaurice, “Gamicad: a gamified tutorial system for first time autocad users,” in Proceedings of the 25th annual ACM symposium on User interface software and technology . ACM, 2012, pp. 103–112
2012
Earlier work this paper cites.
S. Harwin and A. Lucieer, “Assessing the accuracy of georeferenced point clouds produced via multi-view stereopsis from unmanned aerial vehicle (uav) imagery,” Remote Sensing , vol. 4, no. 6, pp. 1573–1599, 2012
2012
Earlier work this paper cites.
Y. Zhou, Y. Yu, G. Lu, and S. Du, “Super-segments based classification of 3d urban street scenes,” International Journal of Advanced Robotic Systems , vol. 9, no. 6, p. 248, 2012
2012
Earlier work this paper cites.
A. Nurunnabi, D. Belton, and G. West, “Diagnostic-robust statistical analysis for local surface fitting in 3d point cloud data,” ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Science, Volumes I-3 , pp. 269–274, 2012
2012
Earlier work this paper cites.
Y. Zhang, Z. Xiong, and F. Wu, “Unambiguous 3d measurement from speckle-embedded fringe,” Applied optics , vol. 52, no. 32, pp. 7797–7805, 2013
2013
Earlier work this paper cites.
B. Gorte, A. Vargas-Luna, and B. Sirmacek, “Camera-projector 3d scanning of a semi-submerged terrain in a flume,” ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences II-4/w1 , pp. 13–18, 2013
2013
Cited alongside, same era.
——, “Automated camera network design for 3d modeling of cultural heritage objects,” Journal of Cultural Heritage , vol. 14, no. 6, pp. 515–526, 2013
2013
Cited alongside, same era.
A. Zolotukhin, I. Safonov, and K. Kryzhanovskii, “3d reconstruction for a scanning electron microscope,” Pattern recognition and image analysis , vol. 23, no. 1, pp. 168–174, 2013
2013
Cited alongside, same era.
H. Huang, C. Brenner, and M. Sester, “A generative statistical approach to automatic 3d building roof reconstruction from laser scanning data,” ISPRS Journal of photogrammetry and remote sensing , vol. 79, pp. 29–43, 2013
2013
Cited alongside, same era.
T. Luhmann, C. Fraser, and H.-G. Maas, “Sensor modelling and camera calibration for close-range photogrammetry,” ISPRS Journal of Photogrammetry and Remote Sensing , vol. 115, pp. 37–46, 2016
2016
Later among the works it cites.
B. C. Bright, E. L. Loudermilk, S. M. Pokswinski, A. T. Hudak, and J. J. O’Brien, “Introducing close-range photogrammetry for characterizing forest understory plant diversity and surface fuel structure at fine scales,” Canadian Journal of Remote Sensing , vol. 42, no. 5, pp. 460–472, 2016
2016
Later among the works it cites.
A. Mayr, M. Rutzinger, M. Bremer, and C. Geitner, “Mapping eroded areas on mountain grassland with terrestrial photogrammetry and object-based image analysis.” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 3, no. 5, 2016
2016
Later among the works it cites.
F. Buffa, A. Pinna, and G. Sanna, “A simulation tool assisting the design of a close range photogrammetry system for the sardinia radio telescope.” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 3, no. 5, 2016
alphaXiv searches the wider corpus for related work and actual follow-ups.
alphaXiv is searching for related work…
M. Fuciños, J. López, X. M. Pardo, and X. R. Fdez-Vidal, “Fast implementation of a new radial symmetry measure for photogrammetry,” in Iberian Conference on Pattern Recognition and Image Analysis . Springer, 2013, pp. 221–228
2013
Cited alongside, same era.
V. Drosos, S. Fidani, and C. Manesis, “Use of photogrammetry and gis in the survey of natural areas of special protection: case study of aesthetic forest kouri almyrou magnisias,” in First International Conference on Remote Sensing and Geoinformation of Environment . International Society for Optics and Photonics, 2013, pp. 87 950C–87 950C
2013
Cited alongside, same era.
D.-M. Kim and H.-J. Kim, “Digital single lens reflex (dslr) camera,” Mar. 26 2013, uS Patent 8,403,573
2013
Cited alongside, same era.
C. S. Fraser, “Automatic camera calibration in close range photogrammetry,” Photogrammetric Engineering & Remote Sensing , vol. 79, no. 4, pp. 381–388, 2013
2013
Cited alongside, same era.
J. López, M. Fuciños, X. R. Fdez-Vidal, and X. M. Pardo, “Detection and matching of lines for close-range photogrammetry,” in Iberian Conference on Pattern Recognition and Image Analysis . Springer, 2013, pp. 732–739
2013
Cited alongside, same era.
G. Lucet, “3d survey of pre-hispanic wall painting with high resolution photogrammetry,” ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences , no. 1, pp. 191–196, 2013
2013
Cited alongside, same era.
J. Zhang and X. Wang, “Digital photogrammetry of chinese early aerial photo and application in morphotectonics mapping of tanlu active fault zone,” in Geoscience and Remote Sensing Symposium (IGARSS), 2013 IEEE International . IEEE, 2013, pp. 2924–2926
2013
Cited alongside, same era.
G. Fengyun and X. Hongquan, “Status and development trend of 3d laser scanning technology in the mining field,” in 2013 the International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE 2013) . Atlantis Press, 2013
2013
Cited alongside, same era.
2016
Later among the works it cites.
D. Cucci, “Accurate optical target pose determination for applications in aerial photogrammetry,” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 3, no. 3, 2016
2016
Later among the works it cites.
V. Casella and M. Franzini, “Modelling steep surfaces by various configurations of nadir and oblique photogrammetry,” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 3, no. 1, 2016
2016
Later among the works it cites.
F. Carvajal-Ramírez, F. Agüera-Vega, and P. J. Martínez-Carricondo, “Effects of image orientation and ground control points distribution on unmanned aerial vehicle photogrammetry projects on a road cut slope,” Journal of Applied Remote Sensing , vol. 10, no. 3, pp. 034 004–034 004, 2016
2016
Later among the works it cites.
C. Amrullah, D. Suwardhi, and I. Meilano, “Product accuracy effect of oblique and vertical non-metric digital camera utilization in uav-photogrammetry to determine fault plane,” ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences , pp. 41–48, 2016
2016
Later among the works it cites.
A. M. Cunliffe, R. E. Brazier, and K. Anderson, “Ultra-fine grain landscape-scale quantification of dryland vegetation structure with drone-acquired structure-from-motion photogrammetry,” Remote Sensing of Environment , vol. 183, pp. 129–143, 2016
2016
Later among the works it cites.
J. Guo, J. Jiang, L. Wu, W. Zhou, and L. Wei, “3d modeling for mine roadway from laser scanning point cloud,” in Geoscience and Remote Sensing Symposium (IGARSS), 2016 IEEE International . IEEE, 2016, pp. 4452–4455
2016
Later among the works it cites.
D. Zai, Y. Guo, J. Li, H. Luo, Y. Lin, Y. Sun, P. Huang, and C. Wang, “3d road surface extraction from mobile laser scanning point clouds,” in Geoscience and Remote Sensing Symposium (IGARSS), 2016 IEEE International . IEEE, 2016, pp. 1595–1598
2016
Later among the works it cites.
P. Babahajiani, L. Fan, J.-K. Kamarainen, and M. Gabbouj, “Comprehensive automated 3d urban environment modelling using terrestrial laser scanning point cloud,” in Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition Workshops , 2016, pp. 10–18
2016
Later among the works it cites.
X. Pang, R. W. Lau, Z. Song, Y. Li, and S. He, “A tool-free calibration method for turntable-based 3d scanning systems,” IEEE computer graphics and applications , vol. 36, no. 1, pp. 52–61, 2016
2016
Later among the works it cites.
D. Allegra, G. Gallo, L. Inzerillo, M. Lombardo, F. Milotta, C. Santagati, and F. Stanco, “Low cost handheld 3d scanning for architectural elements acquisition,” in Proceedings of the Conference on Smart Tools and Applications in Computer Graphics . Eurographics Association, 2016, pp. 127–131
2016
Later among the works it cites.
“Developing with kinect for windows,” https://developer.microsoft.com/en-us/windows/kinect/develop , accessed: 2016-11-19
2016
Later among the works it cites.
M. Hanqing, W. Dong, S. Junfeng, and T. Jiang, “A wideband 45 degree polarized electrical scanning antenna array manufactured by 3d printing with metals,” in Radar (RADAR), 2016 CIE International Conference on . IEEE, 2016, pp. 1–3
2016
Later among the works it cites.
2017
Later among the works it cites.
A. Hattab, I. Gonsher, D. Moreno, and G. Taubin, “Differential 3d scanning,” IEEE Computer Graphics and Applications , vol. 38, no. 3, pp. 43–51, 2017
2017
Later among the works it cites.
H. Bi, W. Zheng, Z. Ren, J. Zeng, and J. Yu, “Using an unmanned aerial vehicle for topography mapping of the fault zone based on structure from motion photogrammetry,” International Journal of Remote Sensing , vol. 38, no. 8-10, pp. 2495–2510, 2017
2017
Later among the works it cites.
C. Chen, S. He, G. Chen, and H. Cao, “Photogrammetry-based 3d printing reproduction method for oil paintings,” International Journal of Pattern Recognition and Artificial Intelligence , vol. 32, no. 03, p. 1854007, 2017
2017
Later among the works it cites.
“Openmp,” http://www.openmp.org/ , accessed: 2017-12-21
2017
Later among the works it cites.
J. Wang, X. Zhang, H. Chen, and S. Ding, “Relative pose measurement of satellite and rocket based on photogrammetry,” in Image, Vision and Computing (ICIVC), 2017 2nd International Conference on . IEEE, 2017, pp. 1117–1122
2017
Later among the works it cites.
“Photomodeler,” http://www.photomodeler.com/index.html , accessed: 2017-12-07
2017
Later among the works it cites.
“Aicon 3d,” http://www.aicon3d.com/ , accessed: 2017-12-11
2017
Later among the works it cites.
“Micmac,” http://micmac.ensg.eu/index.php/Accueil , accessed: 2017-12-11
2017
Later among the works it cites.
“Matlab,” https://se.mathworks.com/products/matlab.html , accessed: 2017-12-11
2017
Later among the works it cites.
“3dm analyst,” https://www.adamtech.com.au/3dm/Analyst.html , accessed: 2017-12-12
2017
Later among the works it cites.
“3dm calibcam,” https://www.adamtech.com.au/3dm/CalibCam.html , accessed: 2017-12-12
2017
Later among the works it cites.
L. Duarte, A. Teodoro, O. Moutinho, and J. Gonçalves, “Open-source gis application for uav photogrammetry based on micmac,” International Journal of Remote Sensing, 38:8-10, 3181-3202 , 2017
2017
Later among the works it cites.
R. Blomley and M. Weinmann, “Using multi-scale features for the 3d semantic labeling of airborne laser scanning data,” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume IV-2/W4 , 2017
2017
Later among the works it cites.
A. Murtiyoso, M. Koehl, P. Grussenmeyer, and T. Freville, “Acquisition and processing protocols for uav images: 3d modeling of historical buildings using photogrammetry,” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 4, 2017
2017
Later among the works it cites.
“Sensefly albris,” https://www.sensefly.com/drones/albris.html , accessed: 2017-12-27
2017
Later among the works it cites.
“Dji phantom 3,” https://www.dji.com/phantom-3-pro , accessed: 2017-12-27
2017
Later among the works it cites.
A. Ley, R. Hänsch, and O. Hellwich, “Automatic building abstraction from aerial photogrammetry,” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume IV-2/W4 , 2017
2017
Later among the works it cites.
J. Barlow, J. Gilham, and I. Ibarra Cofrã, “Kinematic analysis of sea cliff stability using uav photogrammetry,” International Journal of Remote Sensing , vol. 38, no. 8-10, pp. 2464–2479, 2017
2017
Later among the works it cites.
F. M. Scarelli, F. Sistilli, S. Fabbri, L. Cantelli, E. G. Barboza, and G. Gabbianelli, “Seasonal dune and beach monitoring using photogrammetry from uav surveys to apply in the iczm on the ravenna coas (emilia-romagna, italy),” Remote Sensing Applications: Society and Environment , 2017
2017
Later among the works it cites.
“Inpho,” https://geospatial.trimble.com/products-and-solutions/inpho , accessed: 2017-12-11
2017
Later among the works it cites.
E. Sánchez-García, A. Balaguer-Beser, and J. Pardo-Pascual, “C-pro: A coastal projector monitoring system using terrestrial photogrammetry with a geometric horizon constraint,” ISPRS Journal of Photogrammetry and Remote Sensing , vol. 128, pp. 255–273, 2017
2017
Later among the works it cites.
“Open cascade,” https://www.opencascade.com/ , accessed: 2017-12-26
2017
Later among the works it cites.
B. Yang, Y. Liu, Z. Dong, F. Liang, B. Li, and X. Peng, “3d local feature bkd to extract road information from mobile laser scanning point clouds,” ISPRS Journal of Photogrammetry and Remote Sensing , vol. 130, pp. 329–343, 2017
2017
Later among the works it cites.
“Riegl vmx-450,” http://www.riegl.com/uploads/tx_pxpriegldownloads/RIEGL_VMX-450-RAIL_2015-08-24.pdf , accessed: 2017-12-22
2017
Later among the works it cites.
J. Wang, R. Lindenbergh, and M. Menenti, “Sigvox–a 3d feature matching algorithm for automatic street object recognition in mobile laser scanning point clouds,” ISPRS Journal of Photogrammetry and Remote Sensing , vol. 128, pp. 111–129, 2017
2017
Later among the works it cites.
M. Rahrig and A. Luib, “Sri dalada maligawa-3d-scanning and documentation of the temple of the sacred tooth relic at kandy, sri lanka.” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 4, 2017
2017
Later among the works it cites.
“3d laser scanning system with real-time registration and processing,” http://www.riegl.com/nc/products/terrestrial-scanning/produktdetail/product/scanner/48/ , accessed: 2017-12-23
2017
Later among the works it cites.
“Companion software to 3d terrestrial scanners,” http://www.riegl.com/products/software-packages/riscan-pro/ , accessed: 2017-12-23
2017
Later among the works it cites.
“Artec 3d scanners,” https://www.artec3d.com/3d-scanner/artec-eva , accessed: 2017-12-23
2017
Later among the works it cites.
“Artec studio,” https://www.artec3d.com/3d-software/artec-studio , accessed: 2017-12-23
2017
Later among the works it cites.
“Geomagic studio,” http://support1.geomagic.com/Support/5605/5668/en-US/Article/Folder/336/Geomagic-Studio , accessed: 2017-12-23
2017
Later among the works it cites.
“Faro pointsense,” https://www.faro.com/products/construction-bim-cim/faro-pointsense/ , accessed: 2017-12-23
2017
Later among the works it cites.
“Leica cyclone 7.3,” http://w3.leica-geosystems.com/downloads123/hds/hds/cyclone/brochures-datasheet/Cyclone_VIEWER_Pro_7.3_DS_en_IX.11_gzd2_en.pdf , accessed: 2017-12-24
2017
Later among the works it cites.
X. Yu and T. Zhang, “Application of terrestrial 3d laser scanning technology in spatial information acquisition of urban buildings,” in Image, Vision and Computing (ICIVC), 2017 2nd International Conference on . IEEE, 2017, pp. 1107–1111
2017
Later among the works it cites.
T. Majasalmi, L. Korhonen, I. Korpela, and J. Vauhkonen, “Application of 3d triangulations of airborne laser scanning data to estimate boreal forest leaf area index,” International Journal of Applied Earth Observation and Geoinformation , 2017
2017
Later among the works it cites.
S. Altman, W. Xiao, and B. Grayson, “Evaluation of low-cost terrestrial photogrammetry for 3d reconstruction of complex buildings.” ISPRS Annals of Photogrammetry, Remote Sensing & Spatial Information Sciences , vol. 4, 2017
2017
Later among the works it cites.
“Bentley contextcapture,” https://www.bentley.com/en/products/brands/contextcapture , accessed: 2017-12-26
2017
Later among the works it cites.
W. Gruszczyński, W. Matwij, and P. Ćwiakała, “Comparison of low-altitude uav photogrammetry with terrestrial laser scanning as data-source methods for terrain covered in low vegetation,” ISPRS Journal of Photogrammetry and Remote Sensing , vol. 126, pp. 168–179, 2017
2017
Later among the works it cites.
K. Kandare, H. O. Ørka, M. Dalponte, E. Næsset, and T. Gobakken, “Individual tree crown approach for predicting site index in boreal forests using airborne laser scanning and hyperspectral data,” International Journal of Applied Earth Observation and Geoinformation , vol. 60, pp. 72–82, 2017
2017
Later among the works it cites.
“Ptgui 9,” https://www.ptgui.com/news/2013/12/16/ptgui-9.1.9-released.html , accessed: 2017-12-22
2017
Later among the works it cites.
“Nikon d100,” https://en.wikipedia.org/wiki/Nikon_D100 , accessed: 2017-12-23
2017
Later among the works it cites.
C. Wu, “Visualsfm: A visual structure from motion system,” http://ccwu.me/vsfm/doc.html , 2011, accessed: 2018-01-15
2018
Closest in time.
Y. Duan, L. Yan, Y. Zhong, and J. Yao, “A new method of improving height accuracy of airborne photogrammetry using a multi-camera system,” in Geoscience and Remote Sensing Symposium (IGARSS), 2014 IEEE International . IEEE, 2014, pp. 2019–2022
2022
Closest in time.